WolfBox - As A New Vendor, Offering 20% Off Discount!

[FlyersFan76]

I found the anti-glare film to work very well for me in eliminating the reflections.

The film is great unless you intend to use the mirror as a mirror at some point.

 

[Tom109]

The film is great unless you intend to use the mirror as a mirror at some point.

I just ordered it to have as a backup. It was on sale for $7.

 

[Pfk]

Does the Wolfbox function as a traditional mirror, or only has a camera display?

This is important as the clamp on design allows you to remove it if it fails. I would like to have a permanent adaptor if the Wolfbox also functions as a traditional reflecting mirror.

It does not function as a mirror
You would need to remove the clamps and use your mirror.

Edit: thanks to another member making me discover the off button it does function as a mirror, however somewhat dark but still ok to get through

 

[Rab]

You will find it does function as a mirror. That is why there is the option of the reverse wire connection so the camera only comes on in reverse and you use it as a conventional mirror the rest of the time.

 

[Pfk]

You will find it does function as a mirror. That is why there is the option of the reverse wire connection so the camera only comes on in reverse and you use it as a conventional mirror the rest of the time.

If it does function as a mirror, it’s a bad one at best. I have the g900 installed and the mirror effect when it is not functioning as cameras on is a reflective glare. I’m not sure how to activate the mirror you are referring to

 

[FlyersFan76]

If it does function as a mirror, it’s a bad one at best. I have the g900 installed and the mirror effect when it is not functioning as cameras on is a reflective glare. I’m not sure how to activate the mirror you are referring to

It functions as a mirror when you hit the power on the button on the bottom of the mirror.

 

[Pfk]

O

It functions as a mirror when you hit the power on the button on the bottom of the mirror.

Ok thanks, I stand corrected, it functions as a mirror (abit dark however)

 

[chrsbe]

1) when installing the usb adapter via piggyback fuses in the fuse box under the ignition key. Why is there an additional permanent 12V source needed? It's obviously not needed with the cigarette adapter because this plug is dead without ignition.
2) how much power is drawn when ignition is not turned on? Will our wolfbox mirrors drain our batteries like vampires drink blood over night?

 

[Clark Kent]

1) when installing the usb adapter via piggyback fuses in the fuse box under the ignition key. Why is there an additional permanent 12V source needed? It's obviously not needed with the cigarette adapter because this plug is dead without ignition.
2) how much power is drawn when ignition is not turned on? Will our wolfbox mirrors drain our batteries like vampires drink blood over night?

The +12v is needed to enable parking mode so the cameras can record when the vehicle is unattended. The cigarette adaptor doesn't support parking mode.
The hardwire kit has low battery voltage protection. The cameras will shutdown after 60 seconds if the battery voltage drops below 11.6 +/- 0.2 volts in parking mode.

 

[Greni80]

The +12v is needed to enable parking mode so the cameras can record when the vehicle is unattended. The cigarette adaptor doesn't support parking mode.
The hardwire kit has low battery voltage protection. The cameras will shutdown after 60 seconds if the battery voltage drops below 11.6 +/- 0.2 volts in parking mode.

Does anyone know what the best way to remove the stock mirror from the ball joint. Is there a tool or a release clip. I have the wolf box adaptor to use the current US spec mount but I don’t want to damage the old mirror in case I need to use it again.

 

[FlyersFan76]

Does anyone know what the best way to remove the stock mirror from the ball joint. Is there a tool or a release clip. I have the wolf box adaptor to use the current US spec mount but I don’t want to damage the old mirror in case I need to use it again.

It is in this thread somewhere. Need a screwdriver to pry the black metal ring away.

WolfBox - As A New Vendor, Offering 20% Off Discount!

As per @FlyersFan76 response but further detail: The purple/orange is 12v positive whilst in reverse. If you hook this up to the red lead coming from the Wolfbox reversing camera (you will need to extend it if coming through the rubber grommets of the back door) then the Wolfbox mirror changes...

www.theineosforum.com

 

[BD1]

Apologies I have not read thru this entire thread....is it possible to make this OEM with wires tucked away/wrapped, etc.? A lot of pictures I see show it with a lot of wires. And it does look like from the post above that you can remove the stock mirror vs strapping the wolf box on the factory mirror which is nice.

 

[chrsbe]

You can tuck the wires away but you will see the USB and camera cables coming out on top of the Wolfbox.

 

[BD1]

You can tuck the wires away but you will see the USB and camera cables coming out on top of the Wolfbox.

Any pics? Or I can read thru this long thread if there are some there. I see some online but not for the IG. Thanks.