What did you do with your Grenadier today?

[Jean Mercier]

I have a M&M dash cover on and this covering up the sensor in the centre of the dash behind the main screen

Excuse me, and my allergy to abbreviations: M&M?

 

[Logsplitter]

Excuse me, and my allergy to abbreviations: M&M?

. Melville and Moon dash cover

 

[Eric]

Excuse me, and my allergy to abbreviations: M&M?

Trade name, Melvill and Moon

 

[AngusMacG]

I picked up my Grenadier today. New front prop shaft and repairs to oil cooler pipes and I understand a thermostat on the transfer case was damaged. That’s all good and working fine on 60 mile journey home from the dealers. They have also replaced the side steps as the original ones had been stripped of paint underneath due to driving on gravel roads. The new side steps have a tougher paint coating apparently.
The winch has been checked out and the winch control unit is deemed to be faulty so a new one is on order. An audible click can be heard at the controller but no power to the winch.
And a couple of campaign issues have been addressed one of which is to add a battery cover over the live terminal of the auxiliary battery. Very pleased with that as that exposed live terminal has always bugged me.
Finally the damaged drive/prop shaft has been packaged up and awaiting collection for a delivery back to Ineos for an analysis of what’s gone wrong.
Well done to the team at Harwoods for getting me sorted.
One more thing I never realised. I asked the guys at Harwoods why my auto headlight setting seems to be permanently on. The simple answer was a I have a M&M dash cover on and this covering up the sensor in the centre of the dash behind the main screen
View attachment 7868495
View attachment 7868496

Congrats! Hopefully they will report to you what happened. Might be wishful thinking but would be good to know and pass along.

@Jean Mercier M&M is Melville & Moon I believe..not the candy.

 

[Logsplitter]

Trade name, Melvill and Moon

Oh. I added an e

 

[Jean Mercier]

Oh. I added an e

And I learned something new: a sensor on the dashboard ... I thought it would be outside the car, but OK this is a more logical place

 

[Max]

I’m told it’s the C clip at the CV joint but whole drive shaft replaced.
Edit. The failed C clip was the cause of the failure I’m told but from the photos it looks like the CV joint is a bit smashed up.

Thanks for that and it will be interesting to hear about the prop...I also have told the dealer about my side steps rusting, I have my 30000klm coming up, so I might wait for the steps to arrive if they have actually been improved

 

[Braydo]

Something snuck in under my car today

 

[Asnes]

Something snuck in under my car today

Have you noticed a difference in handling as compared to stock shocks?

 

[Braydo]

Have you noticed a difference in handling as compared to stock shocks?

Yes but I haven’t tried it in anger yet so too soon for a verdict. I’ll give them a bit of a stretch this weekend.

 

[TheDocAUS]

Something snuck in under my car today

View attachment 7868513
View attachment 7868514

You need to give a report when you test them a bit.

 

[bigleonski]

Not particularly exciting but I had my UHF, lightbar and an andersen plug to the back installed yesterday.

One thing I do rate is a new bullbar antenna attachment that ARB have brought out though. Very cool. You can attach it anywhere along the bullbar tube - just drill through the tube and a barrel keeps it rigid and it doesn’t move. As most of of my touring going forward will be with the bride in the passenger seat, I didn’t want to mount it on the inside of the hoop straight in front of her. That would piss me off so while she’s never said anything, I’m sure it does her as well. Using this attachment I can put it on the outside on an angle and it looks much better than the normal spring mount. I may cop more whacks from shrubs/tree branches etc but the happy wife / happy life trade off should be worth it.
Being out of the way also means I can put my fishing rod holders on that hoop as well without the antenna being in the way.
The bullbar mounts on the narva lightbar are also pretty good I think.

 

[Clark Kent]

Not particularly exciting but I had my UHF, lightbar and an andersen plug to the back installed yesterday.

One thing I do rate is a new bullbar antenna attachment that ARB have brought out though. Very cool. You can attach it anywhere along the bullbar tube - just drill through the tube and a barrel keeps it rigid and it doesn’t move. As most of of my touring going forward will be with the bride in the passenger seat, I didn’t want to mount it on the inside of the hoop straight in front of her. That would piss me off so while she’s never said anything, I’m sure it does her as well. Using this attachment I can put it on the outside on an angle and it looks much better than the normal spring mount. I may cop more whacks from shrubs/tree branches etc but the happy wife / happy life trade off should be worth it.
The bullbar mounts on the narva lightbar are also pretty good I think.

View attachment 7868533View attachment 7868534View attachment 7868535

That is a nice antenna mount. @bigleonski

Where did you install the Anderson and how did you get power to it?

I've been thinking about drilling the top of the roo bar post and installing a lightweight spring base antenna there. Just needs a wedge to set the antenna vertical. Easy to solve.
Similar to how EHQ have installed this lightbar bracket set; which looks very close to putting the lightbar higher than the top of the bonnet?
Then there's those rod holders...
Anyway, example only!

 

[Paddy]

Do you know what. I’m just as much in the dark as you are. I’m joining some guys on this forum in a couple of weeks time to find out. From what I can tell it’s travelling on permitted but un paved by ways.
I’ll let you know the ins and outs soon

If you don't mind me asking, where are you planning to go? I'm based Jct. 4a of the M3 on the Surrey/Hants border and see you're not far away...

 

[TheDocAUS]

Not particularly exciting but I had my UHF, lightbar and an andersen plug to the back installed yesterday.

One thing I do rate is a new bullbar antenna attachment that ARB have brought out though. Very cool. You can attach it anywhere along the bullbar tube - just drill through the tube and a barrel keeps it rigid and it doesn’t move. As most of of my touring going forward will be with the bride in the passenger seat, I didn’t want to mount it on the inside of the hoop straight in front of her. That would piss me off so while she’s never said anything, I’m sure it does her as well. Using this attachment I can put it on the outside on an angle and it looks much better than the normal spring mount. I may cop more whacks from shrubs/tree branches etc but the happy wife / happy life trade off should be worth it.
Being out of the way also means I can put my fishing rod holders on that hoop as well without the antenna being in the way.
The bullbar mounts on the narva lightbar are also pretty good I think.

View attachment 7868533View attachment 7868534View attachment 7868535

A new UHF bracket for the Roo Bar. Please let us know the details.

 

[Logsplitter]

If you don't mind me asking, where are you planning to go? I'm based Jct. 4a of the M3 on the Surrey/Hants border and see you're not far away...

Yorkshire. Along with some others on the forum. A long way to go from the South Coast but looking forward to it. I’m always up for other meet ups though.

 

[bigleonski]

A new UHF bracket for the Roo Bar. Please let us know the details.

 

[bigleonski]

That is a nice antenna mount. @bigleonski

Where did you install the Anderson and how did you get power to it?

I've been thinking about drilling the top of the roo bar post and installing a lightweight spring base antenna there. Just needs a wedge to set the antenna vertical. Easy to solve.
Similar to how EHQ have installed this lightbar bracket set; which looks very close to putting the lightbar higher than the top of the bonnet?
Then there's those rod holders...
Anyway, example only!

View attachment 7868541

Straight to the battery with a relay mate.

 

[TheDocAUS]

View attachment 7868569

That is very different to the usual UHF mount. It looks neat.

I cannot find it on the ARB website, so far - but that is not uncommon with ARB. I tried both UHF and CB bracket.

 

[Logsplitter]

I’ve just received and unpacked my Almont4WD underbody protection plates. Very impressed with the packaging and quality of the product. Will take a few weeks for me to get it all fitted as time allows but no rush for now Didn’t go for the front plate
as mine still in good order and rear bash plate has been replaced recently anyway