Comprehensive list of all known Grenadier Side Steps

[ADVAW8S]

Has anyone installed the owl vans slider step? If so, what are your thoughts and can you send some pictures?

Read the extreme testing thread from onefin, as One of vehicles has the owl steps. Another has whiteknuckle and the other two have black sheep.

 

[MileHigh]

Has anyone installed the Black Sheep Rail+Step on their IG?

 

[owl]

Has anyone installed the owl vans slider step? If so, what are your thoughts and can you send some pictures?

I have the Owl Slider steps on my Grenadier, I also work for Owl so I will try to not be biased.
They are a fully functional step and rock slider at the same time.
My wife is 5'0" tall and my daughter is about the same height.
I have the Eibach lift springs and 34" tires, so it is tall and difficult to get into the vehicle with out a step.
They fully function as designed as a steel slider and they can take the full weight of the Grenadier in a offroad situation.
The Adrenaline Grenadier on our trip had the Owl tube sliders without the step and they also performed as intended.
The Agile and Black Sheep sliders also performed very well under the conditions as well.
I maintain that I would not take a Grenadier "offroading" without some sort of functional slider.
There are lots of choices in the aftermarket for steps and sliders at the moment, so I think that you can make a choice based on how much step you want or need, and how you want them to look.

 

[owl]

Has anyone installed the Black Sheep Rail+Step on their IG?

Andreas at RRE global has a set on his Grenadier and that product proved itself on the trip I took with Andreas.
I will try to direct him to this thread.

 

[BCM09]

I have the Owl Slider steps on my Grenadier, I also work for Owl so I will try to not be biased.
They are a fully functional step and rock slider at the same time.
My wife is 5'0" tall and my daughter is about the same height.
I have the Eibach lift springs and 34" tires, so it is tall and difficult to get into the vehicle with out a step.
They fully function as designed as a steel slider and they can take the full weight of the Grenadier in a offroad situation.
The Adrenaline Grenadier on our trip had the Owl tube sliders without the step and they also performed as intended.
The Agile and Black Sheep sliders also performed very well under the conditions as well.
I maintain that I would not take a Grenadier "offroading" without some sort of functional slider.
There are lots of choices in the aftermarket for steps and sliders at the moment, so I think that you can make a choice based on how much step you want or need, and how you want them to look.

Do you guys still sell the tube sliders? They’re no longer listed on the Owl website.

 

[owl]

Do you guys still sell the tube sliders? They’re no longer listed on the Owl website.

We have a handful of pairs set aside for Adrenaline HQ. He would be able to get a set on order for you. https://adrenaline-hq.com/pages/contact-us

 

[Scout73]

I have the Owl Slider steps on my Grenadier, I also work for Owl so I will try to not be biased.
They are a fully functional step and rock slider at the same time.
My wife is 5'0" tall and my daughter is about the same height.
I have the Eibach lift springs and 34" tires, so it is tall and difficult to get into the vehicle with out a step.
They fully function as designed as a steel slider and they can take the full weight of the Grenadier in a offroad situation.
The Adrenaline Grenadier on our trip had the Owl tube sliders without the step and they also performed as intended.
The Agile and Black Sheep sliders also performed very well under the conditions as well.
I maintain that I would not take a Grenadier "offroading" without some sort of functional slider.
There are lots of choices in the aftermarket for steps and sliders at the moment, so I think that you can make a choice based on how much step you want or need, and how you want them to look.

Thank you for this! Since you work for Owl, any pics from the shop of an install on a stock grenadier? Mine is currently stock and I’m trying to assess the aesthetics, too, in addition to the durability/functionality. Many thanks!

 

[Ovrland Bill]

White Knuckle ‘zero degree’ (level) Rock Sliders with “Half Plate” (step).

 

[HereinDaRockies]

Is there a measurement of the distance between the step platform and the door’s bottom lip?

This would be a highly objective way to compare how “step friendly” the various sliders.

Aesthetically speaking, I prefer dissent off-road sliders. However the step surface appears to be a couple inches higher than owl sliders

 

[TCMColorado]

The rock sliders from both Overland Garage 4x4 and Dirtbox should be added to the list in the first post.

Overland Garage 4x4
https://everythinggrenadier.com/product/og4x4-rock-sliders-for-ineos-grenadier/

Dirtbox
https://dirtboxoverland.com/product...wbciBdFbaFGHfwPih6-kdw7qOq44hcUgK0UlM0h8P9rdN

Overland Garage

Dirtbox

 

[anand]

LFD Off Road

 

[Dok]

You also have Reulsport: https://www.reulsport.com/produit/ineos-grenadier-rockslider/

 

[Zimm]

LFD Off Road
View attachment 7872481

Is LFD bringing those to market?

 

[Zimm]

I punched up “sliders fj80” to check the “grenadier” tax… it’s about 100%.

 

[anand]

Is LFD bringing those to market?

Yea, mine are the third set in the wild... They should be on their website this week

 

[holdmybeer]

I live on the wet coast and I've delayed my slider purchase to see what else comes along. Someone please correct me if I'm misguided, but isn't stainless steel the way to go for reduced maintenance? I know stainless *can* eventually rust and powder coat or paint chips off anything. But it seems like odds are way in its favour, no? DOM/square/joined/welded...

Given the Grenadier's price point, the stainless premium pays off over its life, no?

I want slider protection first but functional steps are a nice-to-have unless they're some dangly bit that becomes a hangup.

 

[Tom109]

I live on the wet coast and I've delayed my slider purchase to see what else comes along. Someone please correct me if I'm misguided, but isn't stainless steel the way to go for reduced maintenance? I know stainless *can* eventually rust and powder coat or paint chips off anything. But it seems like odds are way in its favour, no? DOM/square/joined/welded...

Given the Grenadier's price point, the stainless premium pays off over its life, no?

100%

 

[Zimm]

I live on the wet coast and I've delayed my slider purchase to see what else comes along. Someone please correct me if I'm misguided, but isn't stainless steel the way to go for reduced maintenance? I know stainless *can* eventually rust and powder coat or paint chips off anything. But it seems like odds are way in its favour, no? DOM/square/joined/welded...

Given the Grenadier's price point, the stainless premium pays off over its life, no?

I want slider protection first but functional steps are a nice-to-have unless they're some dangly bit that becomes a hangup.

What maintenance?? Paint gets scratched on either one and will need touched up either way, and the 1/4" steel I have on other rigs looks fine 10-20 years later. Honestly, SS is a solution looking for a problem. The ss buzz units are 3mm. The mounting arms get bent in transit. Gusset all you want, but slam that on a rock and it's gonna dent. Body protection isn't where weight is the first priority.

 

[holdmybeer]

Thanks for the response @Zimm . I guess I wouldn’t bother touching up scratches and scrapes much if the rust wouldn’t set in very quickly with SS. That seems like less maintenance to me.

OTOH the strength difference between 3mm and 6mm would probably be real. Thanks and I’ll watch for that spec.