What did you do with your Grenadier today?

Wile E Coyote said:

Hi Logsplitter, behind the drivers headlight.
See attached, I pushed the spade connectors back up and put folded plastic in underneath so they wouldn't drop / loosen again.
View attachment 7865937View attachment 7865938
View attachment 7865939View attachment 7865940View attachment 7865941

Click to expand...

PC01 said:

So after a long weekend working on the Grenadier it is much better prepared for the next Morocco trip.
After puncturing the transmission sump last time, I decided to fit the Eibach Pro Lift springs, Braid wheels with new BFG AT's, and fit a full set of underbody protection from Almont 4WD.
Also fitted the D250SE charger with wiring suited to charging a separate box carrying the 100A Lithium Battery for fridge and roof tent consumption, leaving the dual battery system as standard.
Lastly the Bison external side molle panels were fitted for carrying additional water and extra fuel freeing up the roof rack.

Click to expand...

ECrider said:

Looks very good. Taking the trailer over again?

Click to expand...

Jean Mercier said:

3 weeks without driving, because of hip surgery, and today I had planned some mall crawling, but awoke me at 5h30: they needed an interpreter, so I jumped out of bed. After calling me back that they found a lawyer who could be there at 7:00, I drove to the police station at 10 km from my house.

Before starting the car, I did check my battery status on my Grenadier screen, not worried at all, because I had been checking it with my Chinese battery monitor in the last 2 weeks.

View attachment 7865952

The car started without any problems.
Notice that I have the double battery.
After coming home, my battery status was already at 74%!
I then downloaded the data of my battery monitor, and you can see the voltage going slowly down from 12.68 Volt to 12.29 Volt.
(The peak on July 18 is when I moved my car 1 m backwards in my garden and the downward peaks are the two times I opened the car).
View attachment 7865953

I am happy that I can drive again.

Click to expand...

DenisM said:

@Tazzieman ...Is that a home-applied coating on the steel mesh or is it a standard Bunnings offering?
cheers
D

Click to expand...

RapidMesh 600 x 1200mm 25 x 25mm Black Wire Mesh Panel​

Pat said:

Yes, I would say a really beautiful area where it is allowed to go offroad some days of the week.
Have you done also Sommeiller and Jafferau or you only Assietta? I have done all by motorcyle but by car I would not do not dare the first two - because I am not so experienced 4x4 offroader and especially going down the route to Bardonecchia especially in the afternoon after the daily thunderstorm.

Click to expand...

jert said:

did Sommelier two days ago and will do Jafferau today.

Click to expand...

pedrogb said:

Seisa, FNQ, Australia. A couple of days here after plenty of action on the OTT.

Click to expand...

FlyersFan76 said:

I installed the Owl hood latch.

After a month or 2 of looking at the box I finally had time to install a better light in the rear cargo area. Also mounted a flashlight and Elemnt fire extinguisher. I printed the those mounts but the plastic used doesn't like the heat so they didn't hold form enough. So I used the Element mount but didn't take an updated picture.
View attachment 7866124View attachment 7866126View attachment 7866125

My sunglasses mount for a Molle Panel.
View attachment 7866131

Click to expand...

Asnes said:

Can you share a link to the light you added? Hardwired or battery?

Click to expand...

Catalog | Weatherproof 12v LED Lighting & Switches | Kingpin Equipped

Discover Kingpin's robust 12V LED lighting solutions and Smart Touch dimmer switch. Engineered for trucks, SUVs, and outdoor adventures. Bright, durable, and easy to install. Save with our lighting packages.

kingpinequipped.com

TheDocAUS said:

So put us put of our misery, how did it go on the OTT?

Click to expand...