Did we meet at the off-road test drive back in March? I talked to a gentleman from New Orleans at the event.
Did we meet at the off-road test drive back in March? I talked to a gentleman from New Orleans at the event.
What’s the international equivalent of Harbor Freight?Harbor Freight has entered the chat…
Was not me. I have come across a few people from New Orleans that have ordered are have been very interested. Haven't seen one in the city yet if there is one here.
In the UK I’d offer up Machine Mart for consideration. Almost guaranteed to break before you get your new tools to the workshop.
What were you doing?
Axle nut?
As much as we could use the funding, I now doubt HF or MM will be clamoring to sponsor the PODCAST.
I'm picking on HF in good jest because you're exactly right. Personally the only tools I've purchased from them was a set of chisels that were destined for destruction as I used them to knock rivets off an old Series II.
For the novice mechanic, like me, Harbor Freight tools, especially their top line, has been nothing but great. Let’s get them to sponsor the forum!!!
Looks Great, I hope you put in a replica of the Pub as well for club get togethers...
Really impressive! I like that very much. Unfortunately, I'm unlikely to be able to visit due to the distance.
Let us be part of the development. 
Negative. However, I'll leave you with this gem - it only takes 300 seconds (5min) to slather the body frame with sealant before moving to the next phase, which involves the application of two base coats and a top coat. That's all I got.
www.autodaily.com.au
If my assumptions that the far left is a bar area are true then I'm going to say you've created a beautiful masterpiece.
That write up on the production of the Grenadier is nothing short of impressive.Negative. However, I'll leave you with this gem - it only takes 300 seconds (5min) to slather the body frame with sealant before moving to the next phase, which involves the application of two base coats and a top coat. That's all I got.
Factory tour of Ineos Grenadier production line - Automotive Daily
The difference is that Ratcliffe isn’t dreaming. Four years later, the newly formed Ineos Automotive company had physical prototypes, an incipient
But there’s a member on here that would know. I’ll ask him…..
