I almost wonder if those are for EXT5 instead of EXT1. I was looking thru Agile offroad instructions for their light install. Crummy picture, but I found 2 sets of wires. One up but the brake fluid reservoir and the other down on the fender liner.
If you have the aux power option fitted to your car, there are two wire ends under the hood; one for EXT1, the other for EXT5. That picture is showing the aux power switches including EXT5. So which circuit did you connect the lights too, EXT1 or EXT5?
Wires in different location between ANZ and US models. Details are in Rok Dr Guide. I know I sound like a broken recorder but the info is in the Guide.
I'm In the field at the end of a flakey internet connection with a random phone signal so have only just read seen your posts.
Nice find that pic thank you. The lower set (orange black?) on the fender liner are thinner gauge so i suspect they will be the for EXT1. Ones by the brake reservoir look to be purple black and are thicker.
I only saw two wires purple and black. Today I will take the wires direct to battery terminals to see if it lights up. I turned on all the switches in the car the power too, and no light.
The lower set actually looks to be the same purple and black as the upper set, just a smaller gauge. I will get a better look at it tonight and try to verify.
The two wires ends are in the same vicinity, mine were (but I have RHD car). SO start looking in that area, and often on the underside of the loom hidden from view (but that varies).
Exactly what I believe was done.
