Where is the front auxiliary power point?

[rovie]

Here you go

Need a photo?

 

[grnamin]

Here you go

Very nice! Thank you, Rovie!

 

[Pat-Ard]

So, I went down to my car and opened the hood, after a one minute search I found both of the power points. Just on the driver side (LHS) in front of the water refill...

Challenge accepted and went to search the one in the footwell on the right. Found this, too. But this one is really tidy fixed. On the drivers side it failed because I couldn't get the floor lose...

But now the next question how's the polarity for the DTP? Black wire in 1 and lilac in 2 or the other way?

Finally I found this sticker under the hood. Where ist the 2nd hood rod Position?

 

[grnamin]

Please confirm the following...

Thank you very much in advance.

 

[Jean Mercier]

Please confirm the following...View attachment 7837494View attachment 7837495
Thank you very much in advance.

If you compare with my second picture in this thread https://www.theineosforum.com/threads/aux-sockets.12412566/page-2#post-1333201829 you will see that this is indeed right

 

[grnamin]

Thank you, Jean!

 

[ericge]

I wonder if it would be more convenient to add a Deutsche plug connector to the end of the under-bonnet connections.

Of course. If you're going to have a power outlet, at least make it useable. I resent the $200 it cost me to find the outlet and fit a Deutsch socket.

 

[TheDocAUS]

Of course. If you're going to have a power outlet, at least make it useable. I resent the $200 it cost me to find the outlet and fit a Deutsch socket.

It costs a lot more to run your own cabling, fuses, switches, plugs. etc than using what INEOS provides. I just bought some DTP plugs and a crimper and I only need so use them once to cover the cost - verse having an auto electrician do it.

I will install two UHFs and some work lights saving myself lots of money. I say thank you INEOS.

 

[Pat-Ard]

Hooorray!!! I managed to find the power point in the LHD drivers footwell.
In my case it was a little higher up.

Next I'll order some Deutsch DTP plugs and will fit all power points with plugs...

Thanks to everyone here on the forum for the help.

 

[Pat-Ard]

Here you go

Hi @rovie the lilac wire connects to Pin 1 and the black to Pin 2, correct?

 

[rovie]

Hi @rovie the lilac wire connects to Pin 1 and the black to Pin 2, correct?

 

[grnamin]

Hi @rovie the lilac wire connects to Pin 1 and the black to Pin 2, correct?

Speaking of which, is the polarity universal even with vendors or do you have to watch out for it?

 

[alex3dworld]

So you only have the 10A outlet on the right hand side as you are looking into the engine bay
View attachment 7825376

where did you get this graphics from? i'm new around and interested to finding more like this.