Upgraded Transfer Case Cable Bracket: (now available in the forum store)

[[ Adam ]]

I'm in

 

[Grey Wolf]

I am in if shipping to the UK is possible.

 

[tmarr]

I'm in...

 

[NoMoTaco]

It's great to see all the enthusiasm, I've done my best to keep the list up to date as people have expressed interest, but please let me know if I missed anyone.

 

[Trialmaster]

If The @Logsplitter asks, one must oblige! This bracket may not exist if not for your experience.

This may open a can of works, but if @Logsplitter and @CountyV8 are willing to pay the additional postage to UK Im fine with it.

+1 (UK)

 

[Mena2]

I’m in as well if still available. Thanks

 

[RobS]

+1. Thank you

 

[JSDKMS!]

It's great to see all the enthusiasm, I've done my best to keep the list up to date as people have expressed interest, but please let me know if I missed anyone.

I'M IN

 

[saltydog188]

Just received mine today! Thanks Glen!

 

[Asnes]

Me too, thanks as well Glen!

 

[crashnburn]

Got mine too.
Thanks a lot Glen!

 

[Monty]

Greeting All,

Many reports of Transfer Case Cables coming loose from the OEM bracket and rubbing against the driveshaft have been reported (In several cases leading to failure of the cables requiring replacement)

An aftermarket solution to this problem has emerged for those of us who live in the United States!

I am going to be initiating a group buy of these TRANSFER CASE CABLE BRACKETS. I have sourced a set of 20 from the manufacturer and will be collecting a list of 19 others who would like to take advantage (I am buying the first one )

My hope in doing this is to see how popular of an item these might be. If they prove to be a hot commodity, it might be possible to get these on the forum store.

You will need to source two bolts to affix the two pieces together (The manufacturer told me they used 316SS M4x12mm bolt and nyloc nut). The rest uses existing bolts and grommets.

View attachment 7858921
View attachment 7858922
View attachment 7858923

This is what your OEM Bracket looks like :

View attachment 7858924

And here is mine installed (without the two bolts) to assure fitment:

View attachment 7858925
View attachment 7858926
View attachment 7858927

General Disclaimer:
*I am not making money off the sale of these, I am paying for my own and I am selling these at cost (Rounded up to the nearest dollar)
**Payments will be due prior to shipping
***All sales final
****Will be sent out in Two batches (First 9 then Last 10) unless all slots fill quickly

Those who have already expressed interest: @DaBull , @Tom109

Please Reply in this thread to express your interest in being put on the list to purchase

Cost Shipped to your door-Lower 48 only (USPS): $45.00
Hawaii & Alaska will be little extra to ship

Form of Payment: Currently I can only accept Venmo or PayPal (Once your name is added to the list I will send you a PM with my Venmo & PayPal ID)

1) @NoMoTaco
2) @Bruce
3) @Krabby
4) @UncleBuck
5) @Asnes
6) @j3t3r
7) @CountyV8 (UK)
8) @AUDIOBUS
9) @Colorado
10) @anand
11) @DaBull
12) @Sillius Soddus
13) @Tom109
14) @saltydog188
15) @SonnyC
16) @QRgren
17) @MTNDOG
18) @Brandtnm
19) @Thom_worldwide
20) @crashnburn
*Logsplitter Gifted a Bracket Outside this Batch
__________________________________________________

Those Interested in Another Run
21) @Wyoman
22) @Peterr
23) @bbq4133
24) @Ovrland Bill
25) @Tally
26) @AZGrenadier
27) @BenTN
28) @jayson1011
29) @DaneJa
30) @TXJOHN
31) @74CampySuperRecord
32) @grnamin
33) @parb
34) @GN4HIR
35) @IslandFalconer
36) @gtank
37) @Lemon35
38) @Onefin
39) @Texas Grenadier
40) @grenexplorer
41) @Dagger22
42) @MickyWadds
43) @nmoeder
44) @RJCali
45) @wolftimj
46) @Kevin Mokracek
47) @mccasksl
48) @255/85
49) @Skrambo
50) @[ Adam ]
51) @Grey Wolf (UK)
52) @tmarr
53) @Trialmaster (UK)
54) @Mena2
55) @RobS
56) @JSDKMS!
57)
5

Greeting All,

Many reports of Transfer Case Cables coming loose from the OEM bracket and rubbing against the driveshaft have been reported (In several cases leading to failure of the cables requiring replacement)

An aftermarket solution to this problem has emerged for those of us who live in the United States!

I am going to be initiating a group buy of these TRANSFER CASE CABLE BRACKETS. I have sourced a set of 20 from the manufacturer and will be collecting a list of 19 others who would like to take advantage (I am buying the first one )

My hope in doing this is to see how popular of an item these might be. If they prove to be a hot commodity, it might be possible to get these on the forum store.

You will need to source two bolts to affix the two pieces together (The manufacturer told me they used 316SS M4x12mm bolt and nyloc nut). The rest uses existing bolts and grommets.

View attachment 7858921
View attachment 7858922
View attachment 7858923

This is what your OEM Bracket looks like :

View attachment 7858924

And here is mine installed (without the two bolts) to assure fitment:

View attachment 7858925
View attachment 7858926
View attachment 7858927

General Disclaimer:
*I am not making money off the sale of these, I am paying for my own and I am selling these at cost (Rounded up to the nearest dollar)
**Payments will be due prior to shipping
***All sales final
****Will be sent out in Two batches (First 9 then Last 10) unless all slots fill quickly

Those who have already expressed interest: @DaBull , @Tom109

Please Reply in this thread to express your interest in being put on the list to purchase

Cost Shipped to your door-Lower 48 only (USPS): $45.00
Hawaii & Alaska will be little extra to ship

Form of Payment: Currently I can only accept Venmo or PayPal (Once your name is added to the list I will send you a PM with my Venmo & PayPal ID)

1) @NoMoTaco
2) @Bruce
3) @Krabby
4) @UncleBuck
5) @Asnes
6) @j3t3r
7) @CountyV8 (UK)
8) @AUDIOBUS
9) @Colorado
10) @anand
11) @DaBull
12) @Sillius Soddus
13) @Tom109
14) @saltydog188
15) @SonnyC
16) @QRgren
17) @MTNDOG
18) @Brandtnm
19) @Thom_worldwide
20) @crashnburn
*Logsplitter Gifted a Bracket Outside this Batch
__________________________________________________

Those Interested in Another Run
21) @Wyoman
22) @Peterr
23) @bbq4133
24) @Ovrland Bill
25) @Tally
26) @AZGrenadier
27) @BenTN
28) @jayson1011
29) @DaneJa
30) @TXJOHN
31) @74CampySuperRecord
32) @grnamin
33) @parb
34) @GN4HIR
35) @IslandFalconer
36) @gtank
37) @Lemon35
38) @Onefin
39) @Texas Grenadier
40) @grenexplorer
41) @Dagger22
42) @MickyWadds
43) @nmoeder
44) @RJCali
45) @wolftimj
46) @Kevin Mokracek
47) @mccasksl
48) @255/85
49) @Skrambo
50) @[ Adam ]
51) @Grey Wolf (UK)
52) @tmarr
53) @Trialmaster (UK)
54) @Mena2
55) @RobS
56) @JSDKMS!
57)
58)
59)
60)

Count me in, please!

 

[grenadierguy]

Greeting All,

Many reports of Transfer Case Cables coming loose from the OEM bracket and rubbing against the driveshaft have been reported (In several cases leading to failure of the cables requiring replacement)

An aftermarket solution to this problem has emerged for those of us who live in the United States!

I am going to be initiating a group buy of these TRANSFER CASE CABLE BRACKETS. I have sourced a set of 20 from the manufacturer and will be collecting a list of 19 others who would like to take advantage (I am buying the first one )

My hope in doing this is to see how popular of an item these might be. If they prove to be a hot commodity, it might be possible to get these on the forum store.

You will need to source two bolts to affix the two pieces together (The manufacturer told me they used 316SS M4x12mm bolt and nyloc nut). The rest uses existing bolts and grommets.

View attachment 7858921
View attachment 7858922
View attachment 7858923

This is what your OEM Bracket looks like :

View attachment 7858924

And here is mine installed (without the two bolts) to assure fitment:

View attachment 7858925
View attachment 7858926
View attachment 7858927

General Disclaimer:
*I am not making money off the sale of these, I am paying for my own and I am selling these at cost (Rounded up to the nearest dollar)
**Payments will be due prior to shipping
***All sales final
****Will be sent out in Two batches (First 9 then Last 10) unless all slots fill quickly

Those who have already expressed interest: @DaBull , @Tom109

Please Reply in this thread to express your interest in being put on the list to purchase

Cost Shipped to your door-Lower 48 only (USPS): $45.00
Hawaii & Alaska will be little extra to ship

Form of Payment: Currently I can only accept Venmo or PayPal (Once your name is added to the list I will send you a PM with my Venmo & PayPal ID)

1) @NoMoTaco
2) @Bruce
3) @Krabby
4) @UncleBuck
5) @Asnes
6) @j3t3r
7) @CountyV8 (UK)
8) @AUDIOBUS
9) @Colorado
10) @anand
11) @DaBull
12) @Sillius Soddus
13) @Tom109
14) @saltydog188
15) @SonnyC
16) @QRgren
17) @MTNDOG
18) @Brandtnm
19) @Thom_worldwide
20) @crashnburn
*Logsplitter Gifted a Bracket Outside this Batch
__________________________________________________

Those Interested in Another Run
21) @Wyoman
22) @Peterr
23) @bbq4133
24) @Ovrland Bill
25) @Tally
26) @AZGrenadier
27) @BenTN
28) @jayson1011
29) @DaneJa
30) @TXJOHN
31) @74CampySuperRecord
32) @grnamin
33) @parb
34) @GN4HIR
35) @IslandFalconer
36) @gtank
37) @Lemon35
38) @Onefin
39) @Texas Grenadier
40) @grenexplorer
41) @Dagger22
42) @MickyWadds
43) @nmoeder
44) @RJCali
45) @wolftimj
46) @Kevin Mokracek
47) @mccasksl
48) @255/85
49) @Skrambo
50) @[ Adam ]
51) @Grey Wolf (UK)
52) @tmarr
53) @Trialmaster (UK)
54) @Mena2
55) @RobS
56) @JSDKMS!
57) @Monty
58)
59)
60)

Count me as 58 please.

 

[Clark Kent]

Just for reference, @wakeo has posted an alternative here if you're handy and have a piece of scrap ally around.

 

[DaBull]

It's great to see all the enthusiasm, I've done my best to keep the list up to date as people have expressed interest, but please let me know if I missed anyone.

Hi NoMoTaco, Received my brackets today. Nice quality and design. Many thanks! DaBull

 

[ethree]

Greeting All,

Many reports of Transfer Case Cables coming loose from the OEM bracket and rubbing against the driveshaft have been reported (In several cases leading to failure of the cables requiring replacement)

An aftermarket solution to this problem has emerged for those of us who live in the United States!

I am going to be initiating a group buy of these TRANSFER CASE CABLE BRACKETS. I have sourced a set of 20 from the manufacturer and will be collecting a list of 19 others who would like to take advantage (I am buying the first one )

My hope in doing this is to see how popular of an item these might be. If they prove to be a hot commodity, it might be possible to get these on the forum store.

You will need to source two bolts to affix the two pieces together (The manufacturer told me they used 316SS M4x12mm bolt and nyloc nut). The rest uses existing bolts and grommets.

View attachment 7858921
View attachment 7858922
View attachment 7858923

This is what your OEM Bracket looks like :

View attachment 7858924

And here is mine installed (without the two bolts) to assure fitment:

View attachment 7858925
View attachment 7858926
View attachment 7858927

General Disclaimer:
*I am not making money off the sale of these, I am paying for my own and I am selling these at cost (Rounded up to the nearest dollar)
**Payments will be due prior to shipping
***All sales final
****Will be sent out in Two batches (First 9 then Last 10) unless all slots fill quickly

Those who have already expressed interest: @DaBull , @Tom109

Please Reply in this thread to express your interest in being put on the list to purchase

Cost Shipped to your door-Lower 48 only (USPS): $45.00
Hawaii & Alaska will be little extra to ship

Form of Payment: Currently I can only accept Venmo or PayPal (Once your name is added to the list I will send you a PM with my Venmo & PayPal ID)

1) @NoMoTaco
2) @Bruce
3) @Krabby
4) @UncleBuck
5) @Asnes
6) @j3t3r
7) @CountyV8 (UK)
8) @AUDIOBUS
9) @Colorado
10) @anand
11) @DaBull
12) @Sillius Soddus
13) @Tom109
14) @saltydog188
15) @SonnyC
16) @QRgren
17) @MTNDOG
18) @Brandtnm
19) @Thom_worldwide
20) @crashnburn
*Logsplitter Gifted a Bracket Outside this Batch
__________________________________________________

Those Interested in Another Run
21) @Wyoman
22) @Peterr
23) @bbq4133
24) @Ovrland Bill
25) @Tally
26) @AZGrenadier
27) @BenTN
28) @jayson1011
29) @DaneJa
30) @TXJOHN
31) @74CampySuperRecord
32) @grnamin
33) @parb
34) @GN4HIR
35) @IslandFalconer
36) @gtank
37) @Lemon35
38) @Onefin
39) @Texas Grenadier
40) @grenexplorer
41) @Dagger22
42) @MickyWadds
43) @nmoeder
44) @RJCali
45) @wolftimj
46) @Kevin Mokracek
47) @mccasksl
48) @255/85
49) @Skrambo
50) @[ Adam ]
51) @Grey Wolf (UK)
52) @tmarr
53) @Trialmaster (UK)
54) @Mena2
55) @RobS
56) @JSDKMS!
57) @Monty
58) @grenadierguy
59)
60)

Please add me.

 

[Mountain4x4]

Go ahead and add me

 

[GrenADV]

Please add me as well!

 

[Asnes]

Installed mine today. Perfect fit. 10 minute job, 5 minutes of which was sorting through my tool bad to find my 4mm Allen wrench

 

[LWA55DAL]

Count me in please! This a great modification to fix the factory design issue!