Show us your mods.

[Tazzieman]

Just had this epiphany... isn't the interior light on when you're trying to put the key in??

Only if set to come on auto.
It doesn't really illuminate the key slot very well.
Probs with glow in the dark is a few hours after dark it fades.
Unless you get the radium ones from Russia.

 

[anand]

Only if set to come on auto.

My mistake, I thought everyone left them on auto?!

 

[Tazzieman]

My mistake, I thought everyone left them on auto?!

Everyone , except James Bond and Special Forces pretenders. You know who you are your gear is proudly emblazoned with the word "tactical"

 

[Trialmaster]

Ha, i got the same sticker installed like 4 Weeks ago ;-)

Brilliant - need to order one.

 

[anand]

Everyone , except James Bond and Special Forces pretenders. You know who you are your gear is proudly emblazoned with the word "tactical"

Here in the US we refer to those folks as "tacti-cool"

 

[DaveB]

Here in the US we refer to those folks as "tacti-cool"

That's funny, I generally call them tacti-fool.

 

[Andrew Kilby]

BTW if you are looking for company on the Simo trip i would be interested. Done the French Line and WAA/QAA line but not the Rig Road

Very interested. Where are to put based.?

 

[Barney]

Ha, i got the same sticker installed like 4 Weeks ago ;-)

Which size ?
Amazon shows two different thx

 

[bemax]

Also bought one on eBay Germany

Also on AliExpress | Alibaba | eBay.com

Perfect I bought two. The Defender will get one as well.

 

[tristand]

I added a couple of mesh pockets to the rear trim for gloves, dog poo bags etc. Looked like they should have come from the factory!

Also added a couple of tie down rings near the rear doors (drilled the steel corner posts behind the plastic trim and added rivnuts and spacers) to mount mesh panels for storing coats and other soft stuff out of the way against the side panels.

Tristan

 

[Tom D]

I added a couple of mesh pockets to the rear trim for gloves, dog poo bags etc. Looked like they should have come from the factory!

Also added a couple of tie down rings near the rear doors (drilled the steel corner posts behind the plastic trim and added rivnuts and spacers) to mount mesh panels for storing coats and other soft stuff out of the way against the side panels.

Tristan
View attachment 7831161View attachment 7831162View attachment 7831163

Where did you get the mesh pockets?

 

[tristand]

I used the 36x18cm ones:

Mesh pockets

 

[Steveo]

I used the 36x18cm ones:

Mesh pockets

Thanks @tristand, a good find and a perfect fit. I've ordered them.

 

[parb]

Ok i will update the file. Minor improvements here and there and share it here. Probably next week.

I'd love a copy of the file as well.

 

[Skrambo]

Ok i will update the file. Minor improvements here and there and share it here. Probably next week.

Very keen also! Amazing work BTW

 

[chrsbe]

Here is the 3d file for the insert of the cubby box of the Ineos Grenadier.
You can 3d print it. If you do not own a 3d printer use a print service like materialize or something similar and maybe also cheaper.
free to use for everyone. you can alter the file as much as you like. please do not sell it. if someone asks where you got it from please refer to this forum.
enjoy
ps.: would be nice if you post a photo of your prints.

 

[Jean Mercier]

Here is the 3d file for the insert of the cubby box of the Ineos Grenadier.
You can 3d print it. If you do not own a 3d printer use a print service like materialize or something similar and maybe also cheaper.
free to use for everyone. you can alter the file as much as you like. please do not sell it. if someone asks where you got it from please refer to this forum.
enjoy
ps.: would be nice if you post a photo of your prints.


View attachment 7831457View attachment 7831448

Yes Materialize is certainly "top", because it is a Belgian company ... but very seriously: they really are top!

 

[ADVAW8S]

Here is the 3d file for the insert of the cubby box of the Ineos Grenadier.
You can 3d print it. If you do not own a 3d printer use a print service like materialize or something similar and maybe also cheaper.
free to use for everyone. you can alter the file as much as you like. please do not sell it. if someone asks where you got it from please refer to this forum.
enjoy
ps.: would be nice if you post a photo of your prints.


View attachment 7831457View attachment 7831448

Please tell me you carry a butterfly knife in your car. There is only one other person I known that carries a butterfly knife and that is my uncle.

 

[IG_in_AZ]

Ok i will update the file. Minor improvements here and there and share it here. Probably next week.

@chrsbe Thank you for the file! What material did you use?

 

[DaveB]

Please tell me you carry a butterfly knife in your car. There is only one other person I known that carries a butterfly knife and that is my uncle.

Do people get attacked by butterflies a lot?