Lamin-X film for fogs

[Chadd7]

I just put on some yellow Lamin-X precut film on my fogs. Very easy installation (dry method) and very high quality product. It’s thick and easy to work with even on our convex fog lamps. Just make sure you clean with alcohol thoroughly and center them properly. No air bubbles. And they apparently have a 20% sale going on now.

5" Round Light Covers

Give your sealed beams a unique look and protect them with our 5" Round Light Covers. Available in many colors. Made in the USA.

lamin-x.com

 

[Kyabmo1]

Looks great! I just did mine but I had ordered a larger film size which made it harder to work with. I had to use the “wet” method, to maneuver under the trim. That left me with a few small bubbles to work out.

I might reorder and reattempt with the 5”.

 

[Chadd7]

Looks great! I just did mine but I had ordered a larger film size which made it harder to work with. I had to use the “wet” method, to maneuver under the trim. That left me with a few small bubbles to work out.

I might reorder and reattempt with the 5”.

Thanks. This thicker gel-like material is definitely harder to cut. Even the little tabs on the precut round ones gave me some trouble. You may not need to redo yours. I read somewhere that the material breathes ever so slightly, so air bubbles will work their way out. Maybe use a squeegee and slight heat from a hair dryer to try to work out the bubbles before redoing?

 

[Kyabmo1]

Thanks. This thicker gel-like material is definitely harder to cut. Even the little tabs on the precut round ones gave me some trouble. You may not need to redo yours. I read somewhere that the material breathes ever so slightly, so air bubbles will work their way out. Maybe use a squeegee and slight heat from a hair dryer to try to work out the bubbles before redoing?

Yeah, I’ll give it a bit of time to settle down and see how it does. I’m in the obsessing about it phase right now .

 

[Tom109]

What does the light pattern/color look like at night?

 

[Tom109]

I just put on some yellow Lamin-X precut film on my fogs. Very easy installation (dry method) and very high quality product. It’s thick and easy to work with even on our convex fog lamps. Just make sure you clean with alcohol thoroughly and center them properly. No air bubbles. And they apparently have a 20% sale going on now.

5" Round Light Covers

Give your sealed beams a unique look and protect them with our 5" Round Light Covers. Available in many colors. Made in the USA.

lamin-x.com

@Chadd7 - How is this film holding up?