Grenadier Screw/Bolt head types & sizes

[Clark Kent]

the steering wheel has screws near the toot button around the OK button on the right and microphone button on the left. They are very unusual M2 socket head thread cutting. The outer diameter is 2mm, total length8.25mm, with a 4.20mm diameter head. Like this, but smaller: https://www.gobilda.com/m4-thread-forming-socket-head-screws if anyone has a source for such screws, with a longer threaded portion, I'd love to know about it.

You will find m2x 10mm up to 50mm on Ebay, Aliexpress and Amazon.
These are Au sites but you should be able to find the same on US sites.
Look for m2 socket head self tapping.

https://www.ebay.com.au/itm/143323044142?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338980679&customid=&toolid=10001&mkevt=1

M2 M2,6 M3 M3,5 M4 M5 M6 Sechskant Innensechskant Kopf selbstschneidende Schraube 8,8 Güteklasse Schwarz/Nickel Zink Innensechskantschraube für Lautsprecher - AliExpress 13

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

https://www.amazon.com.au/20pcs-Socket-Tapping-Metric-Hexagon/dp/B0DMPB2NC5/?tag=theineosforum-22

 

[TheDocAUS]

The plastic number plate holder for models with the INEOS (RED) winch installed, is secured by four Torx T30 bolts. Image from @BillB It is the bolt on the right in the plastic holder next to the winch lever. Four T30 bolts in total.

 

[TheDocAUS]

The Exterior L track rail is secured with a Torx TX30 bolt. I previously had this as Torx T27, but did a check today.

You need to be careful with T30 and T27 bits, double check both before making a decision. I don't seem to have this issue with other Torx bits just the 27 and 30.

 

[SterlingS!lver704]

Does anyone know the exact specs on the headlight bezel screws? T27? Length / diameter? Pitch?
I forgot to add this option on the build sheet

 

[tangocharlie80]

Does anyone know the exact specs on the headlight bezel screws? T27? Length / diameter? Pitch?
I forgot to add this option on the build sheet

T30

 

[TheDocAUS]

T30

And the bolts will most likely be a metric bolt size and a metric thread.

 

[Rok_Dr]

And the bolts will most likely be a metric bolt size and a metric thread.

All Grenadier bolts/threads are metric. If it has a T30 head is should be an M6 bolt with a coarse (1mm) thread pitch. M6 bolt lengths reported by other members and my own investigations include 16mm 25mm and 40mm

Cheers
Steve

 

[SterlingS!lver704]

And the

All Grenadier bolts/threads are metric. If it has a T30 head is should be an M6 bolt with a coarse (1mm) thread pitch. M6 bolt lengths reported by other members and my own investigations include 16mm 25mm and 40mm

Cheers
Steve

thank you so much! I can run with that info and buy a couple different sizes

 

[TheDocAUS]

Common metric bolts described here.

Here is Bolts and Nuts thread Table showing Metric, American inch and British inch threads.