fixed air compressor

[mcdoogs]

I like the location of the Owl bracket, its a clever use of that space. I’d rather run the trigger to INT1 and use that to tie to ignition. But then there will be the hole in the bracket where the switch should be which would look crappy, or just put the switch there without wiring it up. Maybe I can rig up a blank for that hole.

 

[Airleader]

My solution:

Post in thread 'Adding a third battery.'

Today at 12:12 PM

Found it. Has only a 40 A Fuse, so I take the Littlefuse free port with 300 A and changed the too big M8 bolt to a M6 screw:

From the original INEOS compresso outlet under the rignt rear seat I used only the ingition "+" for the ARB switch (also for the illumination). I used the ARB wiring loom and took the yellow cable from the unused diff lock plug1 for the ignition "+" and connected it to the RED-YEL and BLU-WHT cable at the other end.

• Airleader

Outlet and switch under the rear seats left and right (next weekends work):