Factory winch rope replacement

DustCloud · Jul 28, 2024

Has anyone replaced the rope on the factory winch rope? Mine got jammed on an angle pull moving a tree, and chewed the rope up.

It looks like I could perhaps remove the fairlead to gain sufficient access.... does anyone know if nuts behind the hex bolts are captive?

Jean Mercier · Jul 28, 2024

DustCloud said:
Has anyone replaced the rope on the factory winch rope? Mine got jammed on an angle pull moving a tree, and chewed the rope up.

It looks like I could perhaps remove the fairlead to gain sufficient access.... does anyone know if nuts behind the hex bolts are captive?

View attachment 7864929

If you remove the front skid plate, you have somewhat a better access to the rope, but I don't know if this is sufficient to replace it.

DustCloud · Aug 5, 2024

Thanks for the advise. An update. Turns out the bolts for the fairlead are backed by captive nuts, however it probably would not have been sufficient to use that as the only access as the rope had been forced into a tight mess and I had to cut it out in sections to remove it (un-spooling wasn't going to work).

With all the rope removed in parts I made the observation the red sleeve (which indicates its time to stop spooling, out as seen from the drivers seat perspective) was 3.2m-3.4m from the end of the rope (its about 20cm in length).

Next to make a new cable....

Tinerfeño · Aug 5, 2024

IMHO hidden instalation of winch is not good. One should see the drum and unwind rope before above happens. This is the reason why I have deleted winch from my spec and will make my own solution for this, probably also with a longer rope.

Search

Search

Factory winch rope replacement

DustCloud

Jean Mercier

GG#920

DustCloud

Tinerfeño

Similar threads

Latest posts

Share this page