- Local time
- 11:48 AM
- Joined
- Oct 27, 2023
- Messages
- 80
- Reaction score
- 136
- Location
- San Fernando Valley, California
Added a little armor.
August Pic Winner.
wait and put yours in for September
On mine, bull dust come thru door handle on the 1/3 door and bottom side of the 1/3 door window.
Yep, same here.
Bit odd that. Would try a few variations, offroad mode, handbrake off, in drive etcToday I decided to check and test the winch. Pulled out the line in free spool, a bit stiff but did it ok and pulled out to the red marker. All good so far. Turned the remote on and full green light. Green light also flashing as it should when winch in or out is pressed. Vehicle in neutral, hand brake on , 500a switch on overhead console on. Winch lever in verticle/engaged position. Nothing working. Re-paired the handset and tested power at the 150a breaker under the bonnet, all good. Still not working. The solenoid can be heard clicking in when turning on the 500a switch and I have power at the NATO plug at the rear.
Anyone that has ideas please. Winch line out on the driveway and I’m off for a walk withe dog until someone can help me figure what’s wrong.
Thanks in advance.
I would love to help you. But I don't have a winch myself and therefore unfortunately have no experience to pass on to you. Sorry mate.Today I decided to check and test the winch. Pulled out the line in free spool, a bit stiff but did it ok and pulled out to the red marker. All good so far. Turned the remote on and full green light. Green light also flashing as it should when winch in or out is pressed. Vehicle in neutral, hand brake on , 500a switch on overhead console on. Winch lever in verticle/engaged position. Nothing working. Re-paired the handset and tested power at the 150a breaker under the bonnet, all good. Still not working. The solenoid can be heard clicking in when turning on the 500a switch and I have power at the NATO plug at the rear.
Anyone that has ideas please. Winch line out on the driveway and I’m off for a walk withe dog until someone can help me figure what’s wrong.
Thanks in advance.
I assume the car is on, since you say it is in neutral? Car must be running.Today I decided to check and test the winch. Pulled out the line in free spool, a bit stiff but did it ok and pulled out to the red marker. All good so far. Turned the remote on and full green light. Green light also flashing as it should when winch in or out is pressed. Vehicle in neutral, hand brake on , 500a switch on overhead console on. Winch lever in verticle/engaged position. Nothing working. Re-paired the handset and tested power at the 150a breaker under the bonnet, all good. Still not working. The solenoid can be heard clicking in when turning on the 500a switch and I have power at the NATO plug at the rear.
Anyone that has ideas please. Winch line out on the driveway and I’m off for a walk withe dog until someone can help me figure what’s wrong.
Thanks in advance.
Yes engine running at the time. I’ll try again later. Now walking the dog at Uffington White Horse followed by Sunday pub lunch and some liquid refreshments
In my case it is very very stiff. I usually put the lever in horizontal position (free spool) and pull the line out with the help of my remote.
www.theineosforum.com
Well, that is also interesting to know!
I reckon when I get it sorted I could then store my winch extension rope in there
Depends how long it is! Mine is 25m long, I doubt it
. I will try.
