What's new
The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Show us your mods.

Asnes

Asnes

Grenadier Owner
Lifetime Supporter
Local time
6:41 PM
Joined
Dec 10, 2022
Messages
349
Reaction score
635
Location
Windermere, FL, USA
GrenADV said:
I already purchased a G900 and was playing around with how to remove the existing mirror - and this is what you get:
View attachment 7837517
To remove the existing mirror you have to take a flat head screwdriver and pop off a metal C clamp from around the socket for where the ball (pictured above) is affixed to. Then, give a good tug on the mirror to remove from the ball. From what I can tell - the ball about 5/8” in diameter ball, and I’m having a difficult time figuring out how I can attach to that (ram mounts are all much larger). And, I’m having a hard time figuring out how to remove the plastic. My initial thought is to purchase the following ram mounts and attach them to the wolfbox oem backplate: View attachment 7837518
Click to expand...
Thanks for blazing the trail. I plan to get the same 900. Keep us all posted on the solution to fit to the ball mount :)

I would prefer to fix the camera inside the door looking through the glass so I don’t need to drill.
 
grnamin

grnamin

Grenadier Owner
Lifetime Supporter
Local time
5:41 PM
Joined
Oct 16, 2023
Messages
831
Reaction score
1,235
Location
Texas, USA
Cheshire cat said:
Might need to opt for your rear view camera installation. I fitted mine without any drilling and was thinking how to stick down the wire.
Click to expand...
Maybe with this?
www.kchilites.com

Universal Wire Hider

The KC Universal Wire Hider featuring 3M™ VHB™ double sided adhesive is as simple as it sounds. It is a ~3.3 ft strip of rubber extrusion that has an internal channel to help you hide your wires for a clean install of off-road lights and other
www.kchilites.com www.kchilites.com
 
Voader - Oudersopzwier

Voader - Oudersopzwier

Grenadier Owner
Local time
12:41 AM
Joined
Jun 28, 2023
Messages
302
Reaction score
590
Location
Belgium - Kortrijk
Asnes said:
Tom109 said:
Wonder how well that will work with factory dark tinted glass?
Click to expand...

Hmmmmmm. Good point. I will try it first perhaps before running wires and mounting
Click to expand...
The reason that I chose a high position outside the car is that this gives me the best view. The closest view to the rear end of the car (Even with the big spare wheel blocking a part of that view) and a fair amount of distances view to other car’s or obstacles behind me.
Putting it inside is blocking the view of the rear end of the car. So it isn’t really useful.
(I don’t have the standard camera from INEOS installed) For me it’s more the camera function I need than the dashcam function.
 
Cheshire cat

Cheshire cat

Grenadier Owner
Lifetime Supporter
Local time
11:41 PM
Joined
May 30, 2022
Messages
1,909
Reaction score
4,556
Location
Cheshire, UK
Asnes said:
Thanks for blazing the trail. I plan to get the same 900. Keep us all posted on the solution to fit to the ball mount :)

I would prefer to fix the camera inside the door looking through the glass so I don’t need to drill.
Click to expand...
I fitted my 9000 rear camera on the outside, without any drilling required.
I may alter the fit and drill through the plastic trim panel as per Voadars method.
 

Attachments

  • IMG_0018.jpeg
    IMG_0018.jpeg
    2.1 MB · Views: 342
Pat

Pat

Grenadier Owner
Local time
12:41 AM
Joined
Dec 9, 2022
Messages
180
Reaction score
366
Location
Italy
Asnes

Asnes

Grenadier Owner
Lifetime Supporter
Local time
6:41 PM
Joined
Dec 10, 2022
Messages
349
Reaction score
635
Location
Windermere, FL, USA
Cheshire cat said:
I fitted my 9000 rear camera on the outside, without any drilling required.
I may alter the fit and drill through the plastic trim panel as per Voadars method.
Click to expand...
Cool can you show the wire run on the roof? Thanks! Only 2-3 more months of planning for me :)
 
khmarks

khmarks

Grenadier Owner
Lifetime Supporter
Local time
6:41 PM
Joined
Dec 10, 2023
Messages
43
Reaction score
51
Location
Raleigh, NC, USA
I had one of these printed for me. It fits nicely in my Grenadier.
 
Voader - Oudersopzwier

Voader - Oudersopzwier

Grenadier Owner
Local time
12:41 AM
Joined
Jun 28, 2023
Messages
302
Reaction score
590
Location
Belgium - Kortrijk
Cheshire cat said:
Might need to opt for your rear view camera installation. I fitted mine without any drilling and was thinking how to stick down the wire.
Click to expand...
GrenADV said:
Awesome work! Looking great.

@Voader - Oudersopzwier Any chance you could take a quick picture of the back of the camera? I’m interested to see where/how you ran the cable in the hole you drilled. Thanks in advance!
Click to expand...
Some details about the camera fixation, The plastic cover sits on a plastic trim, connected to the chassis. So you can get the cable under this trim. You need also to loos a bit of the door seal, to get the cable in to the interieur of the car. Than you can guide the cable between the rubber sealing and roof finish towards the corner left or right.
 

Attachments

  • IMG_3801.jpeg
    IMG_3801.jpeg
    1.1 MB · Views: 208
  • IMG_3802.jpeg
    IMG_3802.jpeg
    2.6 MB · Views: 205
  • IMG_3803.jpeg
    IMG_3803.jpeg
    1.5 MB · Views: 203
  • IMG_3712.jpeg
    IMG_3712.jpeg
    2.2 MB · Views: 233
Krabby

Krabby

Global Grenadier 76
Forum Moderator
Grenadier Owner
Lifetime Supporter
Local time
6:41 PM
Joined
Nov 5, 2022
Messages
5,054
Reaction score
9,700
Location
New Jersey, USA
Are those screws already rusted?
 
YIPPE

YIPPE

GG #00286
Grenadier Owner
Lifetime Supporter
Local time
10:41 AM
Joined
Mar 28, 2022
Messages
255
Reaction score
642
Location
Hawkesbury, NSW, Australia
Voader - Oudersopzwier said:
Some details about the camera fixation, The plastic cover sits on a plastic trim, connected to the chassis. So you can get the cable under this trim. You need also to loos a bit of the door seal, to get the cable in to the interieur of the car. Than you can guide the cable between the rubber sealing and roof finish towards the corner left or right.
Click to expand...
Now that these piecess are being removed, can someone please have them scanned for a specialised team to design a new piece with a gutter, not a rolling edge for rain to get us.
A rear awning is useless at the moment unless car is parked downhill.
 
GrenADV

GrenADV

Grenadier Owner
Lifetime Supporter
Local time
6:41 PM
Joined
Dec 24, 2021
Messages
195
Reaction score
410
Location
West Virginia
Voader - Oudersopzwier said:
Some details about the camera fixation, The plastic cover sits on a plastic trim, connected to the chassis. So you can get the cable under this trim. You need also to loos a bit of the door seal, to get the cable in to the interieur of the car. Than you can guide the cable between the rubber sealing and roof finish towards the corner left or right.
Click to expand...
Perfect! Thank you for the great pictures and good information - I’m feeling much more confident in this installation route.
 
You must log in or register to reply here.

Similar threads

L
300w inverter retrofitted - how I did it.
Replies
1
Views
410
landmannnn
L
F
Where to install a 3kw inverter?
Replies
3
Views
284
anand
anand
F
Inverter on 500amp line?
Replies
4
Views
461
Clark Kent
Clark Kent
TheDocAUS
Battery Box Reviews - Australian focus
Replies
11
Views
515
TheDocAUS
TheDocAUS
Tinki
Inverter Retrofit To OEM 400 W .
2
Replies
29
Views
1K
Tinki
Tinki
Forum Store
The officially unofficial podcast for INEOS Automotive Grenadier Works Podcast
INEOS Grenadier Configurator

Latest posts

Share this page

Back
Top Bottom