A little information about the HIGH-LOAD ADDITIONAL SWITCH BOX AND ELECTRICAL PREPARATION

DCPU · Dec 3, 2022

Ein paar Infos zum HOCHLAST-ZUSATZSCHALTKASTEN UND ELEKTRISCHE VORBEREITUNG

Für alle die sich Gedanken dazu gemacht haben wie sie Ihr Zubehör verkabeln sollen. Die wasserfesten Stecker nennen sich DT Deutsch Stecker 2 Polig und sind im KFZ Zubehör erhältlich und natürlich bei uns. Mit diesen Steckern könnt Ihr die bereits ab Werk vorgerüsteten Anschlüsse nutzen und...

www.schmidtpremiumcars.de

Logsplitter · Dec 3, 2022

I take it that the connectors in question are the dtp/25amp type?

https://www.farnell.com/datasheets/628276.pdf

DenisM · Dec 3, 2022

Well there you go Deutsch connectors... they seem to be de rigueur these days for adding electrical bits and pieces...the only problem has been the price and especially the proper crimping tools... which I've baulked at until now...However, since I'm spending a motza (technical term for "a lot"of money) on the Grenadier, heck...what's a couple of hundred for a decent set of Deutsch crimp tools and assorted lugs and connectors.... The equivalent cost of a a single tank of diesel at today's prices!

DCPU · Dec 3, 2022

DCPU · Dec 3, 2022

Logsplitter said:
I take it that the connectors in question are the dtp/25amp type?

https://www.farnell.com/datasheets/628276.pdf

I'm thinking notionally the standard DT series for the 10 amp circuits and the DTP for the 25 amp ones.

Deutsch also seem to differentiate between the grey and black connectors in terms of quality:

Krabby · Dec 3, 2022

Is it a safe assumption the connectors will be the same regardless of location? IE The UK, Aus, North America, etc.

DCPU · Dec 3, 2022

I would guess that there's no reason that they have to be. How widely are Deutsch connectors used over there? If they're not widely available then maybe there's a market specific connector that's more appropriate.

Logsplitter · Dec 3, 2022

Here’s a cheaper alternative crimp tool for deutech connectors. Probably not robust enough for everyday professional use but a
suitable alternative for the occasional user.

Deutsch Connector Crimp Tool | Deutsch Connectors | Buy Spares Online

Deutsch 'DT' Connector Crimping Tool. Crimping tool for D-sub Contacts. Suitable for Contacts with AWG12 - 20 (0.5 - 4.00mm2). Carbon steel frame with black oxide finish and soft Ergonomic handle.

www.htsspares.com

Logsplitter · Dec 3, 2022

Once I get the vehicle I’ll be making up new leads for the compressor , trickle charger, solar charger and auxiliary lights etc. so I’ll be looking for a reasonably priced crimper solution.

emax · Dec 4, 2022

On my motorbike, I have fitted AMP Superseal plugs like the one below. If mounted correctly, they are waterproof and available with many different numbers of pins.

The crimping pliers was around 170 Euros and is worth every cent.

rchrds · Dec 18, 2022

emax said:
On my motorbike, I have fitted AMP Superseal plugs like the one below. If mounted correctly, they are waterproof and available with many different numbers of pins.

The crimping pliers was around 170 Euros and is worth every cent.

I also use Deutche connectors and bought a crimper a few years ago for bike and boat projects. This is good news indeed.

RotorOver · Dec 29, 2022

There are actually a couple of styles of DT pins and therefore a couple of styles of crimpers that will work. The more expensive solid pins require the expense type of crimper, but if you go with the type of pin that wraps itself around the wire a weather pack style crimper can be used with a cost of about $25 US. The inexpensive style are fine for automotive applications and can handle the loads seen.

Inexpensive

Expensive

DenisM · Dec 29, 2022

Great info! thanks

emax · Dec 30, 2022

The "expensive" crimping tool, if it's a professional build, allows different dies. Mine came with three pairs and thus replaces three tools - which makes it less expensive.

There are cheap ones with exchangable dies as well, but I don't know about the quality. "Klauke" is an excellent choice. In this specimen, one pair of dies is mounted and two other pairs of dies are "parked" in the handles.

stickshifter · Dec 30, 2022

These seem to be an excellent product. Does anyone know if they are used much in the U.S.?

emax · Dec 30, 2022

I don't know about the US market. But I know that in Germany, Klauke has an excellent reputation among tradesmen, electricians - and me, not to forget.

They have a search site for their dealers:

https://www.klauke.com/me/en/where-...&r=0&p=1&lat=39.952584&lng=-75.165222&l=4&v=c

Krabby · Dec 31, 2022

On the subject of electronic tools, I do not own a multi meter And feel like it’s something I should own. I have tons of hand tools and learned a lot from my father who was a mechanic. He also taught me plumbing, general carpentry, etc. But one thing he didn’t mess with was electrical stuff so my knowledge and working experience with that stuff is nonexistent.

I have been watching countless YouTube videos trying to get a better understanding of the basics and it’s apparent adding a multimeter to my toolbox is a must.

Any suggestions on a good choice for a meter? Seems like you can get ones for as little as 10-15 bucks and on the other end of the spectrum they can run into the hundreds. I don’t need the latest and greatest but I believe in buying quality tools.

RoadBuilder · Dec 31, 2022

Krabby said:
On the subject of electronic tools, I do not own a multi meter And feel like it’s something I should own. I have tons of hand tools and learned a lot from my father who was a mechanic. He also taught me plumbing, general carpentry, etc. But one thing he didn’t mess with was electrical stuff so my knowledge and working experience with that stuff is nonexistent.

I have been watching countless YouTube videos trying to get a better understanding of the basics and it’s apparent adding a multimeter to my toolbox is a must.

Any suggestions on a good choice for a meter? Seems like you can get ones for as little as 10-15 bucks and on the other end of the spectrum they can run into the hundreds. I don’t need the latest and greatest but I believe in buying quality tools.

Fluke or Greenlee. Although, Milwaukee makes a pretty good multimeter that is much less expensive.

DenisM · Dec 31, 2022

For general tool box use, and learning the black arts of electronics, in your part of the world, Walmart and Sears have reliable multimeters from $10 -$30. Pick one in the middle $ range.
My high school best mate who's been a professional electronics design engineer for 40+ yrs has collection of multimeters, some of which cost a "king's ransom" . He freely admits with a grin that his "meter of choice" for what he refers to as "day to day rough and tumble work" is a A$40 unit from a well known local electronics chain!

To use one properly however you need to understand basic electrical theory. Check out high school physics classes on YouTube.. it's a marvellous resource.

DaveB · Dec 31, 2022

Krabby said:
On the subject of electronic tools, I do not own a multi meter And feel like it’s something I should own. I have tons of hand tools and learned a lot from my father who was a mechanic. He also taught me plumbing, general carpentry, etc. But one thing he didn’t mess with was electrical stuff so my knowledge and working experience with that stuff is nonexistent.

I have been watching countless YouTube videos trying to get a better understanding of the basics and it’s apparent adding a multimeter to my toolbox is a must.

Any suggestions on a good choice for a meter? Seems like you can get ones for as little as 10-15 bucks and on the other end of the spectrum they can run into the hundreds. I don’t need the latest and greatest but I believe in buying quality tools.

Get one that is designed for auto electrical use

Best Automotive Multimeter (2022 Guide)

Whether you’re checking on your car battery’s output or if a pesky socket is producing a current, one of our best automotive multimeters can jumpstart your process.

www.motor1.com

Search

Search

A little information about the HIGH-LOAD ADDITIONAL SWITCH BOX AND ELECTRICAL PREPARATION

DCPU

Ein paar Infos zum HOCHLAST-ZUSATZSCHALTKASTEN UND ELEKTRISCHE VORBEREITUNG

Logsplitter

Photo Contest Winner

DenisM

DCPU

DCPU

Krabby

Global Grenadier 76

DCPU

Logsplitter

Photo Contest Winner

Deutsch Connector Crimp Tool | Deutsch Connectors | Buy Spares Online

Logsplitter

Photo Contest Winner

emax

Photo Contest Winner

rchrds

RotorOver

Attachments

DenisM

emax

Photo Contest Winner

stickshifter

emax

Photo Contest Winner

Krabby

Global Grenadier 76

RoadBuilder

DenisM

DaveB

Best Automotive Multimeter (2022 Guide)

Similar threads

Latest posts

Share this page