Americas Wolfbox is installed and it is very cool

[Chadd7]

I've only done this once when I forgot to disable start/stop, but it worked: I flipped the INT2 switch to off, gave it about a 5 count, then flipped it back on and the mirror turned on.

I think the long term solution is hardwiring it to the fuse box or battery, but I've run enough wire for now. I'll revisit it in a month.

I do the same. I have the same issue and wired it to INT2 as well. I never knew it was related to start/stop. I will try to turn start/stop off on my next long drive.

 

[Airleader]

If this is not a feature you are interested in, the red wire doesn't need to be connected at all..

Thanks to LRNAD90! That was the key information!!!

 

[HereinDaRockies]

What is the start up performance of the wolf box? Concerned about delay until the rear view is available

 

[landmannnn]

What is the start up performance of the wolf box? Concerned about delay until the rear view is available

About 3 seconds longer than the factory reverse camera.

 

[AUDIOBUS]

To anyone - Is there a way to wire up/power the camera to bypass the start/stop issue? I'm all ears/eyes. Installing this camera is on my electrical to do list and I'm almost to it.

@Loc Nar @Reducs, @Clark Kent for the way I've wired the mirror (comes on with engine start, not wired to INT1 or INT2), if I flip the PWR toggle on the overhead switch panel, the mirror will come on.