Shovel Side Mount Using Utility Belt

[bamanuke]

That makes me wish I had ordered mine with the tool belt. Any guess what the part number is to add it now?

should be GRA-7000-005910 for the rails and GRA-0000-003690 for the hardware. mine came to $178.00 + tax.

 

[Commodore]

should be GRA-7000-005910 for the rails and GRA-0000-003690 for the hardware. mine came to $178.00 + tax.

Much appreciated!

 

[Psignore00]

Has anyone tried these yet?

Universelle Gummi-Halterung mit Airline Schraub-Fittings 6x30 mm, 2er Set, rot | eBay

Du kannst die Halterung problemlos an allen gängigen Airline-Schienen befestigen, selbst bei versenkten oder fest verbauten Schienen. Entdecke die vielseitige und hochwertige Gummi-Halterung, speziell entwickelt für die einfache und sichere Befestigung von Werkzeugen und Ausrüstung an...

www.ebay.com

 

[Michael H.]

Thanks to all the advice here, I have mounted a shovel onto the utility belt.

I used a pair of https://www.z1motorsports.com/misce...l-quickfist-riser-by-z1-off-road-p-44901.html

Attached to the utility belt using https://www.aliexpress.com/item/1005006954198737.html

I chose the M6 bolts, so I didn't have to drill out the risers.

The shovel I used was a https://www.roofracksgalore.com.au/spade-black-1065mm-handle-blue-grip

Next step is to apply some type of grip tape to the handle (where the QuickFists grab it) to prevent the shovel from rotating and touching the bodywork.

 

[Zimm]

whats preventing any of these mounting solutions from letting the shovel blade make contact with the truck?

 

[Dual Grenny Guy]

Thanks to all the advice here, I have mounted a shovel onto the utility belt.

I used a pair of https://www.z1motorsports.com/misce...l-quickfist-riser-by-z1-off-road-p-44901.html

Attached to the utility belt using https://www.aliexpress.com/item/1005006954198737.html

I chose the M6 bolts, so I didn't have to drill out the risers.

The shovel I used was a https://www.roofracksgalore.com.au/spade-black-1065mm-handle-blue-grip

Next step is to apply some type of grip tape to the handle (where the QuickFists grab it) to prevent the shovel from rotating and touching the bodywork.

View attachment 7873501View attachment 7873502View attachment 7873503View attachment 7873504View attachment 7873505

 

[parb]

I'm a fan. A bit of rubber edge guard on the shovel blade should be enough to protect the paint even if it rotates in it's mount.

 

[Zimm]

I'm a fan. A bit of rubber edge guard on the shovel blade should be enough to protect the paint even if it rotates in it's mount.

Assuming it doesn’t get scrubbed off by the branch or whatever is scraping along the side in the process. Hanging shit off the side isn’t my bag but, if I were to do it the blade end would slide into a firmly mounted pocket.