The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Rear lockable drawer storage at least 7 inches(175km) interior height?

JordanGuss

Grenadier Owner
Local time
12:30 AM
Joined
Sep 13, 2024
Messages
3
Reaction score
5
Location
Raleigh, NC, USA
I already had the Yakima MOD drawer system, which works pretty well with a few adjustments and lays nearly level with the back seats when folded down. It’s also modular so you can add and delete additional upper drawers and/or baskets, which is nice. May ultimately go with a more permanent solution though.

Also, I probably need to post this in a new thread, but the Pakmule Scout, paired with the Rig’d Supply RambleSwing (off-road capable swing out hitch) is a great addition for accessible gear storage for the Grenadier. I went with the 7” riser on the Pakmule Scout to preserve as much departure angle as possible. Very sturdy and functional set up.
 

Attachments

  • IMG_1321.jpeg
    IMG_1321.jpeg
    3.5 MB · Views: 13
  • IMG_1192.jpeg
    IMG_1192.jpeg
    5.7 MB · Views: 12
  • IMG_1465.jpeg
    IMG_1465.jpeg
    3 MB · Views: 12

RobS

Grenadier Owner
Local time
12:30 AM
Joined
May 15, 2023
Messages
396
Reaction score
504
Location
USA - New Jersey
I went with the Diabolical drawer. I modified the internal drawer dividers so that I gain maximum length from corner to corner. The height is perfect for me. It allows just enough room to fit the dog kennel below the bison rack. Flat platform with seats folded. Lockable drawer but not the same level of security platform as @ShootingCar ’s Truck Vault.
IMG_8493.jpeg
 

JordanGuss

Grenadier Owner
Local time
12:30 AM
Joined
Sep 13, 2024
Messages
3
Reaction score
5
Location
Raleigh, NC, USA
I went with the Diabolical drawer. I modified the internal drawer dividers so that I gain maximum length from corner to corner. The height is perfect for me. It allows just enough room to fit the dog kennel below the bison rack. Flat platform with seats folded. Lockable drawer but not the same level of security platform as @ShootingCar ’s Truck Vault.
View attachment 7879196
RobS, if you haven’t seen it yet, Ruffland has a new “Backseat Rider” kennel that has the same dims as the Intermediate, but is a few inches shorter and should fit in the back on a drawer with the seats up. It’s roughly the same length as their Medium kennel, and I’ve tested that and that fits with the seat up and a folding table mounted on the rear door. I have intermediates now, but I have a pair of the Backseat Riders on order.
 

RobS

Grenadier Owner
Local time
12:30 AM
Joined
May 15, 2023
Messages
396
Reaction score
504
Location
USA - New Jersey
RobS, if you haven’t seen it yet, Ruffland has a new “Backseat Rider” kennel that has the same dims as the Intermediate, but is a few inches shorter and should fit in the back on a drawer with the seats up. It’s roughly the same length as their Medium kennel, and I’ve tested that and that fits with the seat up and a folding table mounted on the rear door. I have intermediates now, but I have a pair of the Backseat Riders on order.
I haven’t seen. Thank you. Will take a look.
 

ShootingCar

Grenadier Owner
Local time
10:30 PM
Joined
Feb 1, 2024
Messages
136
Reaction score
175
Location
Cottonwood, AZ, USA
I haven’t seen. Thank you. Will take a look.
I have been looking at the Rufflands also to get an easier and shorter in height crate to fit on my truck vault as my wire crate will only fit if I erect it in place. However I may be downsizing in dogs from a very aging Gordon Setter to a Cocker Spaniel puppy in the next year. So I may be going to a small crate anyway.
 

Attachments

  • IMG_3696.jpeg
    IMG_3696.jpeg
    4.3 MB · Views: 1
Back
Top Bottom