Installed 4 wire trailer harness on truck

[zschicago]

Hi I could find this detailed with photos and correct wiring color.

 

[anand]

Are you asking if someone has installed a 4 wire trailer harness?

I'm assuming you did not get the factory hitch option?

The easiest (only?) way of doing this would be to get to the back of the taillights and piggyback off of those wires to trigger your 4 wire harness (assuming you've purchased a kit that just needs the triggers for each output). On the taillight the wire functions are labelled, so it should be pretty easy to see which wires you'll need

 

[zschicago]

Installed CARROFIX Non-Powered Taillight Converter with 20" Inches Leads and 60" Inches 4-Wire Flat Extension Vehicle End Connector from Amazon. Remove Right rear trim panel. 6 bolts and trim clips. Wire harness is easy to get to.

 

[anand]

Oh that's interesting... You don't have the TRM but you have the harness going to it; that makes it much more convenient.

What is the build date of your vehicle? (or the last 5 of your VIN)

 

[zschicago]

Installed the 4 pin self closing cover down by hitch. Ran wires through thruhole in floor next to wire harness. 2 rubber grommets. One inside and one under car. Super easy.

Oh that's interesting... You don't have the TRM but you have the harness going to it; that makes it much more convenient.

What is the build date of your vehicle? (or the last 5 of your VIN)

Hi, meant to say couldnt find this. My car didnt come with trailer kit. Ive done this before on other trucks. My last five vin is. 41604 thx much