The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

High Beam Wire Location?

Local time
6:47 AM
Joined
Dec 6, 2023
Messages
11
Location
Idaho, USA
I am having trouble locating the Yellow/Green high beam wire under the bonnet in my US, left hand drive Grenadier. Any help? Photos of the location?
 
I am having trouble locating the Yellow/Green high beam wire under the bonnet in my US, left hand drive Grenadier. Any help? Photos of the location?
Same here. I am also looking for the yellow/green wire.
 
Any updates here? I am looking for the same wire 😀
Pull the driver’s side light out and look for the violet/orange wire. I purchased the DT connectors so that I could make a harness and not have to cut into the wiring.

B0EA915C-1E36-4CCA-B488-93A326FED0D2.jpeg


63DF7F8C-DA1A-4069-B1EB-EE94074D2FF3.jpeg
 
This is so smart. Thank you for giving me the idea...!

How many pins is in that dt connector?
I assume you just interposed at the connector to the lamp housing?

It is DT and not DTP? I'd like to order the connectors first before I open up the light assembly to map out which wire I need.
 
DT comes in 2, 3, 4, 6, 8 or 12 pin connectors.
I use DT for connectors under 10A in other parts of my car. I have a bunch of DT2 pin connectors.

If there is interest I can make a few more interpose cables. I won't setup a factory for it but I can make a few extra.
It would be useful if I could see a pic on what colors they are using in the bundle so I can order wire in the same color to make future trouble shooting a bit easier.
 
This is so smart. Thank you for giving me the idea...!

How many pins is in that dt connector?
I assume you just interposed at the connector to the lamp housing?

It is DT and not DTP? I'd like to order the connectors first before I open up the light assembly to map out which wire I need.
This is the plug that I used:
 
Back
Top Bottom