GP Factor

Hey Guys! AJ From GP Factor. Excited to be a part of this forum as a vendor and lifetime member!

If you are unfamiliar with GP Factor, we produce high end vehicle parts and camping gear in the USA. We have prided ourselves on making parts that do not compromise on quality, and provide years of hard use. We had announced earlier this year that we will be making a full line of parts for the Ineos Grenadier. Currently, we produce one of the best folding tables on the market. We are excited to announced and give you all a sneak peek to the version we will be releasing for the Grenadier! This table is currently based on the same proven design we have made for years for Jeeps, Campers, Broncos, and Land Cruisers. It will be sized and specifically designed for the Grenadier. The specs of this table for your Grenadier as follows:

• NO drilling or modification. This will use the existing factory bolt riv-nut locations so installation is super easy. You could even use your factory mounting hardware.
• It will come with our patented cableless hinge design that is both durable and easy to use.
• Table is made from food Grade 304 stainless
• One handed dual latch design for easy closing and opening
• All tables include a ½” bamboo cutting board that can be removed for cleaning or flipped over for dual sided use.
• We will be releasing a second version of this table that will have a compartment built into the backer (like the factory plastic piece)

FULL LISTING FOR THIS TABLE CLICK HERE: GP GRENADIER FOLDING TABLE


We will be opening up preorders for these in a few weeks and plan to ship the first batch in January/Early February 2024. I have also included in this post some pictures of our existing tables for reference.
You can also find a lot more pics, videos, and other media on our existing tables on our Instagram or website - @gp_factor

We will be releasing other products soon (maybe some stuff you all have been requesting…) for the Grenadier so keep an eye on our vendor area of the forum and also subscribe to our email list as well on our website – Gpfactor.com

Thanks and let me know if you have any questions! Cheers,

 

[parb]

It’s just nomenclature. The 12.5k just abbreviating that it’s a 12,500 lb winch rating. The model from come up is I guess technically designated as a 12.5RS. R is I believe the designation for wireless remote capable, and S for synthetic line.

Hi AJ, thanks for providing the decoder ring to the model numbers. Its not always super obvious when you look at it on a web page..

 

[GPFACTOR]

About to pull the trigger on a couple of your products and have a couple of questions about the Rear Door Accessory Mount...

1) How much weight can the mount handle? I assume no more than 2/3rds of the door's capacity as it uses only 4 of the 6 mounts.

2) What's the largest Rotopax fuel can that can be carried without limiting the door's openingn?

3) How much space is there between the large accessory mounting surface and the rear door skin where the "lambda" is? - i.e. - .125"? .250"? etc.

4) RE: Grenadier Fender Plates - Do they add enough strength to stand on the fenders with only the HSB tape?

Thanks!

1. I dont have specifics on weight. We have mounted 4 gallons of gas, propane mount full on it with no issues. its mounted the same way as the factory ladder but I wouldnt climb on it just because its only the bottom four mounting points like you stated. I would say probably no issue with 50lbs.

2. We have mounted a 3 gallon with no issue or contact

3. Space is approx 1/2" so after screws are mounted for rotopax mount or propane mount, there is enough clearance for the bolt heads

4. The strength of our fender plates is probably great than the factory ones due to thickness and how they are attached. The factory ones are held on with a handful of Aluminum Rivets. We use 7 feet of VHB per fender plate. As far as standing on them, the rivets or VHB wouldn't determine any strength related to standing weight on them. Our plates are thicker, same exact dimensions as the factory ones but they should both perform the same in regards to top load weight. I have have stood very momentarily on the plate but I don't prefer it. That is whether its a factory fender plate cover, or ours, or anyone else's. IMHO The fender plate covers are simply that - a cover. I don't see how they would add a massive amount of structural strength. The fenders to me, with how they are constructed, I'm sure can "Handle" someone standing on it briefly, but having taken them apart a few times, I personally wouldn't use it as a stepping point on a regular basis (again, regardless of which fender plates you have).