Black Sheep Ctek D250 charger bracket

[DaveB]

The -ive to the auxiliary battery comes off the -ive terminal on the 250SE, top rhs.
These vids give an overview.

View: https://www.youtube.com/watch?v=2zUb_EDL1as

View: https://www.youtube.com/watch?v=wig1gln2d-U

Funny how he says "if your kids are listening to the Stereo" which is a term no kids these days would recognise.
My mum used to say she was listening to "the wireless" when she meant the radio and "the gramophone" when she had a record on. (usually 78's)

 

[MarkH]

Funny how he says "if your kids are listening to the Stereo" which is a term no kids these days would recognise.

This got around a few years ago, demonstrates just how differently their brains are wired. I'm constantly amazed how they just intuitively know how to fix stuff on my PC, and I grew up using them for the past 40+ years and still can't figure stuff out.

View: https://www.youtube.com/watch?v=n0geurEskdo

 

[DaveB]

This got around a few years ago, demonstrates just how differently their brains are wired. I'm constantly amazed how they just intuitively know how to fix stuff on my PC, and I grew up using them for the past 40+ years and still can't figure stuff out.

View: https://www.youtube.com/watch?v=n0geurEskdo

Funny
I posted that on here back in early 2022

 

[Black Sheep]

@Black Sheep Have emailed twice but no response?

Good morning
We can't find any query regarding the bracket with the sender Andrew. Could you contact suppport@blacksheep-innovations.com to clarify the issue? BTW: The shipping cost for this product to Australia is 49 AUD.

 

[TheDocAUS]

I am also trying to order this bracket, and shipping to Australia is coming up at 221 AUD.

Blacksheep has already posted that is incorrect, the website is not properly pricing postage to Australia.

 

[AnD3rew]

Good morning
We can't find any query regarding the bracket with the sender Andrew. Could you contact suppport@blacksheep-innovations.com to clarify the issue? BTW: The shipping cost for this product to Australia is 49 AUD.

Sent to shop@blacksheep-innovations.shop Perfect thank you will order and email to the support address to figure out the details.

 

[AnD3rew]

Sent to shop@blacksheep-innovations.shop Perfect thank you will order and email to the support address to figure out the details.

Update @Black Sheep that email address suppport@blacksheep-innovations.com is bouncing back with a “permanent error”

 

[Chris]

Update @Black Sheep that email address suppport@blacksheep-innovations.com is bouncing back with a “permanent error”

You have 3 ‘p’ s in support

 

[globalgregors]

You have 3 ‘p’ s in support

Bugger me, well spotted. Thanks

 

[DaveB]

You have 3 ‘p’ s in support

I don't think you should make fun of his stutter

 

[Black Sheep]

Oh man, things are going wrong there..... ;-)
Just send me an email to my private address and I'll solve the problem personally: thomas.gruetter@blacksheep-innovations.com
Sorry for the hassle!

 

[Michael H.]

Update - Just placed my order. Website now calculating postage correctly.

 

[bakepl]

Oh man, things are going wrong there..... ;-)
Just send me an email to my private address and I'll solve the problem personally: thomas.gruetter@blacksheep-innovations.com
Sorry for the hassle!

Hi Thomas, when you come to Brisbane how about you slip one in your luggage for me and I'll buy you a beer at the local?

 

[MarkH]

Yes may as well bring a bag full.

 

[TheDocAUS]

Latest from kaon. Call out to Brisbane owners. Please contact kaon haha.

Thanks

FYI, I made some more KAON requests today, via email. Ask and you may receive.

Fuel filter guard
I understand from the INEOS forum KAON have got, or will have, an INEOS Grenadier to scan and make some KAON products. Can I suggest a guard for the diesel fuel filter towards the front (see attached image).

The water/fuel separator (the other fuel filter) is up on the chassis on the passenger’s side rear, but is not exposed as the second filter.

Dual charger mounting bracket
In an earlier email I asked for a bracket to mount the CTEK 120S and 250SE in the INEOS’s battery compartment. I am still interested in that.

Rear roof shelf in cargo area
I am also interested in one of these for the INEOS: https://www.kaon.com.au/standalone-rear-roof-shelf-to-suit-mitsubishi-paje

ARB Dual compressor bracket
Last, I am also looking for bracket to mount on the hook points on the rear cargo area (passengers’ side), so I can mount a twin ARB compressor, with an ARB air tank.

Thanks for your time. I will keep watch on the website.

 

[TheDocAUS]

AUSTRALIA - KAON INEOS ACCESSORIES UPDATE

I received this email from KAON a few minutes ago:

At this stage if we were to design accessories for the Grenadier next year, it would be the barrier, rear roof shelf, side molle panels and a bonnet aerial bracket. The other products you have mentioned below would be on a case by case/customer demand basis.

I suggested a few other items including a dual mounting bracket (hence the second sentence).

In short, no dual mounting bracket on the drawing board not even in 2024.

If anything else comes from KAON it will be next year.

 

[bigleonski]

AUSTRALIA - KAON INEOS ACCESSORIES UPDATE

I received this email from KAON a few minutes ago:



I suggested a few other items including a dual mounting bracket (hence the second sentence).

In short, no dual mounting bracket on the drawing board not even in 2024.

If anything else comes from KAON it will be next year.

Disappointing- liked the idea of the aerial bonnet bracket, will hunt further.

Was talking to a mate today who has a ford everest. He was saying a number of places aren’t bothering to design for them given small volumes compared to toyota / nissan and all the utes. I imagine everests would easily outsell IG’s so the pickings might be slim.

 

[TheDocAUS]

Disappointing- liked the idea of the aerial bonnet bracket, will hunt further.

Talk to GMF4X4 in Bathurst NSW. They seem to make bonnet aerial brackets for lots of cars: https://www.gmf4x4.au/uhfantennabrackets

 

[Michael H.]

Talk to GMF4X4 in Bathurst NSW. They seem to make bonnet aerial brackets for lots of cars: https://www.gmf4x4.au/uhfantennabrackets

I’ve contacted GMF4x4 in Bathurst. They said they were “very interested”, but when I offered to drop my Grenadier in for measuring up they said “great, book it in for late September.”

I’ve also contacted Vogue Industries, and had no reply.

TLR Products have passed my enquiry to their development team.

 

[TheDocAUS]

I’ve contacted GMF4x4 in Bathurst. They said they were “very interested”, but when I offered to drop my Grenadier in for measuring up they said “great, book it in for late September.”

I’ve also contacted Vogue Industries, and had no reply.

TLR Products have passed my enquiry to their development team.

If you do drop the car off late September, get GMF4X4 to make a dual mounting bracket as well.

I have made about 15 requests so far, response rate about 50% and a positive response about one in 3.