Bison Gear - 4x4 & Overlanding Accessories

We're Bison Gear, and our mission is to provide you with the absolute best gear for your next thrilling journey. 🏞
Currently, our focus is on the remarkable INEOS Grenadier, recognized as the ultimate platform for overlanders.

First top-notch products are already out in the market, specially designed to enhance your INEOS experience.
But that's just the beginning! Soon, we'll be rolling out an entire range of premium gear, meticulously crafted for your INEOS Grenadier.

Stay ahead of the adventure game with Bison Gear – where quality meets exploration! 🏕

 

[Cheshire cat]

I got an invoice from FedEx on email before delivery and poastal after delivery, I am guessing I have to pay this and it isn't a con?

Can you say what the value of your goods were and what taxes UK want? I am thinking of spending £500.00 with Bison.

 

[terdrocket]

My rack is out for delivery

 

[CRH]

Can you say what the value of your goods were and what taxes UK want? I am thinking of spending £500.00 with Bison.

Rear boot shelf, TAX is about £66

 

[Bison-Gear]

The rack arrived yesterday. Today we started to install it. One crossbar had been damaged a little bit during transport. But it still worked out.
We missed some screws to mount the wind deflector, which easily can be done later.
Oh, and we missed an installation guide! This isn’t necessary. We didn’t found it online neither but managed to build it anyway. Would be interesting what we did in the wrong way .

Installation instructions are available under the link below:

https://bison-gear.com/img/cms/instructions/RR-GRND%2034%20Installation%20Guide.pdf

Regarding missing wind deflector bolts. I can confirm that few first shipped packages were missing 4 M6x16 mm bolts. All missing bolts are on way to customers right now. Sorry for inconvenience.

Regarding damaged bar, replacement was shipped you should get it end of this week or on Monday.

 

[nickelnoff]

Thanks @Bison-Gear for the prompt delivery of the roof shelf. Went in very nicely, Defintelty not a 15-20 minute job though! Took me a good hour. All fits perfectly though!

Question: On the product photo for the “Under the Shelf Compartment”

https://bison-gear.com/1487-large_default/under-the-shelf-compartment.jpg

There seem to be some drawers shown but no listing - still work in progress? What’s the story ?

 

[Bison-Gear]

Thanks @Bison-Gear for the prompt delivery of the roof shelf. Went in very nicely, Defintelty not a 15-20 minute job though! Took me a good hour. All fits perfectly though!

Question: On the product photo for the “Under the Shelf Compartment”

https://bison-gear.com/1487-large_default/under-the-shelf-compartment.jpg

There seem to be some drawers shown but no listing - still work in progress? What’s the story ?

Actually we have Ineos Drawers ready for production. We will add sleeping option soon and the it will be available to order.

Drawers are made from bended aluminum sheet metal, not profiles so you don't loose space for the aluminum frame. Each side has only
3 mm. On typical drawers made from profile and ply wood, each side of the box is 20 - 25 mm, and drawers 10 to 16 mm.
This means with our drawers you save 10 to 14 cm space in width and around 4 to 6 cm in height.

This setup will be on display at ABENTEUER & ALLRAD, Bad Kissingen, Germany. Stand Z112.

 

[nuclearmonkey]

Actually we have Ineos Drawers ready for production. We will add sleeping option soon and the it will be available to order.

Drawers are made from bended aluminum sheet metal, not profiles so you don't loose space for the aluminum frame. Each side has only
3 mm. On typical drawers made from profile and ply wood, each side of the box is 20 - 25 mm, and drawers 10 to 16 mm.
This means with our drawers you save 10 to 14 cm space in width and around 4 to 6 cm in height.

This setup will be on display at ABENTEUER & ALLRAD, Bad Kissingen, Germany. Stand Z112.

View attachment 7856269View attachment 7856270

Do you have internal dimensions for the drawers? Thanks

 

[inganjjang]

All parts are ready, now they are on packaging. Whole batch will be ready in one week, but we will start shipping earlier (by order date).

Do u know if it's ready?

 

[terdrocket]

I finally installed my roof rack. I really like it.

 

[ECrider]

The rack arrived yesterday. Today we started to install it. One crossbar had been damaged a little bit during transport. But it still worked out.
We missed some screws to mount the wind deflector, which easily can be done later.
Oh, and we missed an installation guide! This isn’t necessary. We didn’t found it online neither but managed to build it anyway. Would be interesting what we did in the wrong way .

nice. what do you keep in the cage?

 

[bemax]

Installation instructions are available under the link below:

https://bison-gear.com/img/cms/instructions/RR-GRND%2034%20Installation%20Guide.pdf

Regarding missing wind deflector bolts. I can confirm that few first shipped packages were missing 4 M6x16 mm bolts. All missing bolts are on way to customers right now. Sorry for inconvenience.

Regarding damaged bar, replacement was shipped you should get it end of this week or on Monday.

Everything arrived today and I was able to mount the wind deflector within 10 minutes (including running for the tools). Tomorrow I will have some hundred kilometers on the Autobahn and will find out whether the rack is loud or not. Within city speed there has not been any significant noise.

 

[bemax]

nice. what do you keep in the cage?

Someone who asked one question to much

 

[AngusMacG]

I’m definitely going to order the roof rack at some point. I want to order the drivers side Molle Panel and Jerry can holders as well. Just ordered my Roof shelf.

 

[bemax]

How noisy is the roof rack at highway speeds?

Yesterday I drove 500 km on the Autobahn. I have to say that the roof rack gets notable at 160 km/h. But it is far from noisy even at that speed!
Most important, there is no whistling or similar sound a no speed. I can recommend it for everyone who drives with highway speed.

 

[NoAge Hunter]

Actually we have Ineos Drawers ready for production. We will add sleeping option soon and the it will be available to order.

Drawers are made from bended aluminum sheet metal, not profiles so you don't loose space for the aluminum frame. Each side has only
3 mm. On typical drawers made from profile and ply wood, each side of the box is 20 - 25 mm, and drawers 10 to 16 mm.
This means with our drawers you save 10 to 14 cm space in width and around 4 to 6 cm in height.

This setup will be on display at ABENTEUER & ALLRAD, Bad Kissingen, Germany. Stand Z112.

View attachment 7856269View attachment 7856270

Looks nice. Is it fixed on the airline rails?

 

[Dermot]

Shipping started this week. Next week most roof rack will be shipped.

I have been trying to order rear window Molly panels over the past 2 weeks and claim the 10% discount with no luck and I have now missed the 10% discount date which ended 25/5/24 as the website did not recognise the codes. I have signed up for the newsletter to receive 5% discount and still await discount code. I would like to place the order but am waiting for a reply from Bison gear re: code
Please help

 

[bemax]

I have been trying to order rear window Molly panels over the past 2 weeks and claim the 10% discount with no luck and I have now missed the 10% discount date which ended 25/5/24 as the website did not recognise the codes. I have signed up for the newsletter to receive 5% discount and still await discount code. I would like to place the order but am waiting for a reply from Bison gear re: code
Please help

I would suggest you write them an email. I had a problem ordering the roof rack some weeks ago and they helped me as soon as they understood that I am not just to dump to order in the internet.
But don’t expect an immediate response as the are at an off-road fair in Germany till tomorrow.

 

[BarnesH]

Fitted

 

[JSDKMS!]

View attachment 7849193View attachment 7849194
View attachment 7849195View attachment 7849192

3/4 Roof Rack for INEOS Grenadier is now available.
View attachment 7849191

Where can I get the AL fixing rail that this mounts to as mine did not come with them? Also any leads on some for the truck floor? Thanks

 

[Bison-Gear]

Where can I get the AL fixing rail that this mounts to as mine did not come with them? Also any leads on some for the truck floor? Thanks

Hello,

Actually to install the roof rack you don't need railing (if I understood part you're referring to). Roof rack use factory threaded holes. Please check installation guide on the website.