What's new
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

What the screw?

The File is ready for sharing.

Ineos Grenadier mobile phone and cupholder by chrisbe | Download free STL model | Printables.com

mounts on top of the centre console. optional 4mm bungee cords for heavy off-road use to strap down your phone. | Download free 3D printable STL models
www.printables.com www.printables.com
Feel free to print and use it. Please post a photo and give me feedback on where you think it could be improved.


Screenshot 2025-01-15 105634.png
PXL_20250115_082727824.jpg

PXL_20250115_082707481.jpg
PXL_20250115_082839101.jpg
 
Looks like its designed to funnel dirt into the center dial control section.. (which i never use and would tear out for a cubby in a second). That would be loaded with change and lint in a week with me. I'm the only one Im sure, but, If you can redesign that so the top edge is level, and there's a tunnel under one side letting crap fall out that shouldn't be there, send me the file. :)
 
Zimm said:
Looks like its designed to funnel dirt into the center dial control section.. (which i never use and would tear out for a cubby in a second). That would be loaded with change and lint in a week with me. I'm the only one Im sure, but, If you can redesign that so the top edge is level, and there's a tunnel under one side letting crap fall out that shouldn't be there, send me the file. :)
Click to expand...
You could always take a small piece of cardstock or plastic and make a false floor - that way you could still get to the knob if that was needed. Prior to a few weeks back I had never used that stuff until I started wearing gloves as the weather turned. The gloves I have are not touch screen capable so the knob and buttons are actually useful.
 
Last edited:
I think the bungee would work better if two cords were used oriented horizontally one to the front and the second to the rear, going left to right (Red)….or vertically (Green)

That should allow better access to the touch screen (if needed) and also still allow easy placement/removal.

I use my dial too much for this to be an option for me but I think its a great idea for those who don’t!!! Love the creativity and outside the box thinking🤙🏻🤙🏻

IMG_2434.jpeg
 
Krabby said:
You could always take a small piece of cardstock or plastic and make a false floor - that way you could still get to the knob are if that was needed. Prior to a few weeks back I had never used that stuff until I started wearing gloves as the weather turned. The gloves I have are not touch screen capable so the knob and buttons are actually useful.
Click to expand...
GLOVES??? pffft. I like to keep my manhands rough, cracked and stained.
 
www.mcmaster.com

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
www.mcmaster.com www.mcmaster.com

scroll down to tapping screws for plastic.
 
Jiman01 said:
I think the bungee would work better if two cords were used oriented horizontally one to the front and the second to the rear, going left to right (Red)….or vertically (Green)

That should allow better access to the touch screen (if needed) and also still allow easy placement/removal.

I use my dial too much for this to be an option for me but I think its a great idea for those who don’t!!! Love the creativity and outside the box thinking🤙🏻🤙🏻

View attachment 7884375
Click to expand...
The bungee cords won't be needed most of the time. That's why I designed it that way. The case is constructed so the cord completely retracts within it. (The cord I used in this picture is not very elastic and also a little too long. That's why it does not fully retract.) Use 4mm bungee cord and it will work.
 
LC0013 said:
They are more like Quartishpounders now. Seems like all products are going the way of the candy bar and just getting smaller all the time.
Click to expand...
pre cooked weight is .... 1/4 pound.

maybe youre just getting larger.
 
You must log in or register to reply here.

Similar threads

parb
Screw used for the seat heat button plate?
Replies
7
Views
417
parb
parb
Loc Nar
Ram Mount Projects
2
Replies
25
Views
1K
MileHigh
MileHigh
Mallig
Fitting my Thule to the Rhino Rack Cross Bars
Replies
6
Views
1K
Mallig
Mallig
ADVAW8S
What i have learned about the Grenadier inventory.
2 3
Replies
46
Views
6K
INEOS OG
INEOS OG
TheDocAUS
DASHCAM - cable run for the rear dashcam camera
Replies
5
Views
2K
TheDocAUS
TheDocAUS
Forum Store
The officially unofficial podcast for INEOS Automotive Grenadier Works Podcast
INEOS Grenadier Configurator

Latest posts

Share this page
Back
Top Bottom