What the screw?

[chrsbe]

The File is ready for sharing.

Ineos Grenadier mobile phone and cupholder by chrisbe | Download free STL model | Printables.com

mounts on top of the centre console. optional 4mm bungee cords for heavy off-road use to strap down your phone. | Download free 3D printable STL models

www.printables.com

Feel free to print and use it. Please post a photo and give me feedback on where you think it could be improved.

 

[Krabby]

What is the bungee for?

 

[chrsbe]

a little seatbelt. the bungee is there to hold the phone in its cradle when off-roading. it is not needed on regular roads or tracks and can be stored away.

 

[Krabby]

a little seatbelt. the bungee is there to hold the phone in its cradle when off-roading. it is not needed on regular roads or tracks and can be stored away.View attachment 7884369View attachment 7884371

Brilliant!

 

[Zimm]

Looks like its designed to funnel dirt into the center dial control section.. (which i never use and would tear out for a cubby in a second). That would be loaded with change and lint in a week with me. I'm the only one Im sure, but, If you can redesign that so the top edge is level, and there's a tunnel under one side letting crap fall out that shouldn't be there, send me the file.

 

[Krabby]

Looks like its designed to funnel dirt into the center dial control section.. (which i never use and would tear out for a cubby in a second). That would be loaded with change and lint in a week with me. I'm the only one Im sure, but, If you can redesign that so the top edge is level, and there's a tunnel under one side letting crap fall out that shouldn't be there, send me the file.

You could always take a small piece of cardstock or plastic and make a false floor - that way you could still get to the knob if that was needed. Prior to a few weeks back I had never used that stuff until I started wearing gloves as the weather turned. The gloves I have are not touch screen capable so the knob and buttons are actually useful.

 

[Jiman01]

I think the bungee would work better if two cords were used oriented horizontally one to the front and the second to the rear, going left to right (Red)….or vertically (Green)

That should allow better access to the touch screen (if needed) and also still allow easy placement/removal.

I use my dial too much for this to be an option for me but I think its a great idea for those who don’t!!! Love the creativity and outside the box thinking

 

[Zimm]

You could always take a small piece of cardstock or plastic and make a false floor - that way you could still get to the knob are if that was needed. Prior to a few weeks back I had never used that stuff until I started wearing gloves as the weather turned. The gloves I have are not touch screen capable so the knob and buttons are actually useful.

GLOVES??? pffft. I like to keep my manhands rough, cracked and stained.

 

[Krabby]

a little seatbelt. the bungee is there to hold the phone in its cradle when off-roading. it is not needed on regular roads or tracks and can be stored away.View attachment 7884369View attachment 7884371

What are the dimensions of the phone holder area? I have a chunky Otterbox case on my iphone max. Thanks!

 

[Krabby]

I am trying something different. A simple 3d print where mobile phones and man-mugs find their peace. The only thing that holds me back is finding the right screws. Can someone please help me specify them? I would need them a bit longer.
Merci so much!
C
View attachment 7883792View attachment 7883793

Not sure on the thread pitch but these look SIMILAR

 

[Zimm]

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

scroll down to tapping screws for plastic.

 

[chrsbe]

....I found the matching screws in the "fasteners shrine" in my workshop.

 

[chrsbe]

I think the bungee would work better if two cords were used oriented horizontally one to the front and the second to the rear, going left to right (Red)….or vertically (Green)

That should allow better access to the touch screen (if needed) and also still allow easy placement/removal.

I use my dial too much for this to be an option for me but I think its a great idea for those who don’t!!! Love the creativity and outside the box thinking

View attachment 7884375

The bungee cords won't be needed most of the time. That's why I designed it that way. The case is constructed so the cord completely retracts within it. (The cord I used in this picture is not very elastic and also a little too long. That's why it does not fully retract.) Use 4mm bungee cord and it will work.

 

[chrsbe]

What are the dimensions of the phone holder area? I have a chunky Otterbox case on my iphone max. Thanks!

91mm x 194mm

 

[Krabby]

91mm x 194mm

What are these mms you speak of?

For those in Liberia - 3.58268 x 7.6378 inches.

 

[chrsbe]

I would say two quarterpounders could fit if you squeeze them a little bit.