Thanks for sharing. Is it Plug/N/Play (I have ordered mine but looks like I will only have 1 day to fit it before I head north from BNE to Double Island Point)
Must say I had the exact same experience with Summer Auto Parts they were really easy to deal with. My steps shipped yesterday (new version with LED Light Strips) just wondering how long would the install take for a first timer? (I only have one full day before I leave on a trip but don't want to start the install unless I have enough time to complete it)
Yes, is now plug n play. Give yourself 3 or 4 hours I guess to fit. Suggest laying everything out and read the info here. I used the supplied plastic strips and no silicone. See how it goes. Hopefully yours is set up for RHD. If not easy fix via the app (and if needed direct conversation with summer auto who were very helpful)
Hey Adam......Did the shims come included or did you need to make/source them yourself ??
Shims included.
Yes, all need to be cut out to fit. Easy job.
Yes just cut them. I have done that on the ones I installed. That is one of the things that just takes time on this install. Once you do one side the next side is half the time.
Cool
Best to use Hot Knife or Jigsaw ?? (not that it can be seen I suppose but I like to be neat) also, did they provide a template or do you need to mark out yourself ??Just a fine tooth hacksaw is all that's needed really or a jigsaw. You might want to drill say a 6mm diameter hole in each corner so you have a small curve at the corners. Each cut is only around 2-2.5" long thereabouts. No template is supplied - at least not with mine.Cool
Thanks ..........Only had enough shims for nearly one side will need to make some more :-(
Just want to say thank you for all of this information you have posted, has made me purchase a set myself and try the installation, just don’t want to mess up as you could understand.
Fairly straight forward really. Best to put a day aside so not rushed but only half a day I guess required. Locate and place everything out first and sort your wiring runs. From memory I had two slightly different style of bolts (with tangs) one will fit in a certain hole whilst the other will not basically - with my kit at least.
Let me know if you hire yourself out as a helping hand.
