Underbody Protection from Rival

grnamin · Sep 11, 2024

parb said:
Jig saw with a metal cutting blade?

It's there anything behind the plate in that area? eg can I cut it in place without removing?

Nothing behind the plate.

Zimm · Sep 11, 2024

parb said:
Jig saw with a metal cutting blade?

It's there anything behind the plate in that area? eg can I cut it in place without removing?

If I was on the trail I'd butcher it in place, but, it's AL. It isn't like the one I made for my fj60 that weighs 125lbs and I use a motorcycle jack to remove. It's frighteningly stupefyingly light. Feel up behind it, mark it in place with a sharpie, and remove.

Ovrland Bill · Sep 12, 2024

Rival informs me that replacement plates will be available in late November.

74CampySuperRecord · Sep 12, 2024

I can do the mod myself. Is the template downloadable? I have not contacted Rival.

A full replacement and keeping the original sounds bad for Rival.

parb · Sep 12, 2024

i emailed them and asked them to replace my under carriage protection for this issue. I'm not sure i love the idea of cutting up new skid plate -and i figured i could send it back and wait a bit.
They told me that they had put me on the list for a replacement and that they expect the replacement to be available in November (similar to what Bill above said). They said that they did not want my old skid plate back -probably useless to them.

I really commend them for their customer service. Prompt, reasonable and very responsive. I will go out of my way to buy more products from Rival -they deserve my business.

LeonD · Sep 12, 2024

Loc Nar said:
I have been in touch with Rival's Sales Team about this issue and they are acting with fantastic swiftness to address it. As noted above, they are delaying pending orders to allow for corrections to be made before shipment. Also, for those of you who have already ordered and received the uncorrected plate, if you are not inclined or lack the tools to do your own modifications like @grnamin (great job, by the way and thanks for the pics!), you can send sales-us@rival4x4.com an e-mail with your original Order Number information/invoice for the Engine Plate and request to be put on the list to receive a corrected plate for free, with free shipping, when they become available. Rival also told me that they do not need you to return the old plate. So, you can sell it as scrap metal or convert it to an interesting coffee table. Up to you.

It will make a wonderful center piece when we celebrate Festivus in December.

74CampySuperRecord · Sep 13, 2024

I sent an email to Rival yesterday noting my order number and explanation of the rubbing issue. I asked if there was a fix available or template to use as a modification.

I still have yet to receive a response.

Nadir5 · Sep 13, 2024

74CampySuperRecord said:
I sent an email to Rival yesterday noting my order number and explanation of the rubbing issue. I asked if there was a fix available or template to use as a modification.

I still have yet to receive a response.

I contacted them through the website and they informed me that a template is pending from the factory and provided a photo of another customer’s trim job as reference if I wanted to proceed without waiting for the template.

I’m sure we’ll all be sorted out soon.

LeonD · Sep 13, 2024

I ordered a replacement skid plate, they confirmed my request and placed me on the wait list.

Ovrland Bill · Sep 13, 2024

74CampySuperRecord said:
I sent an email to Rival yesterday noting my order number and explanation of the rubbing issue. I asked if there was a fix available or template to use as a modification.

I still have yet to receive a response.

Rival has been very responsive to my emails.

e_k_powell · Sep 13, 2024

I agree they have been super classy to deal with. I'm in Houston and asked them if they have a shop they work with that can notch the corner on the plate vs. me trying to do it and it will look crappy. They recommended a shop and they are going to cover it. I'm just going remove it and go buy there and have the shop cut it and then put it back on. I have the TC skid and diff skids on order and they helped out with those some too. Hard to find company's that actually take ownership and put customer's first.

grnamin · Sep 13, 2024

So far so good. No diff-to-plate contact after the mod.

74CampySuperRecord · Sep 13, 2024

I feel bad that they are willing to take a financial hit for complete replacement of the earlier units even if they can be modded.

That says something about them. They stand behind their product. That is rare and reassuring.

AUDIOBUS · Sep 15, 2024

Rival sent a replacement crossbar, and when I emailed to thank them, I inquired about the modification template to the transmission skid plate. About 2 min later I got a response with the attached files. I'd say the official R&D for this fix appears to be @grnamin!

I wasn't expecting a response until Monday -- props to Rival -- any individual / company willing to respond to a customer late on a Saturday afternoon after hours is beyond ok in my book. Like or dislike the product, simply standing behind what you do goes a long way...

Cheers folks. Happy grinding.
~AB

ps. @Stu_Barnes should these make their way to the "resources" page or just leave them here?

wolftimj · Sep 15, 2024

AUDIOBUS said:
Rival sent a replacement crossbar, and when I emailed to thank them, I inquired about the modification template to the transmission skid plate. About 2 min later I got a response with the attached files. I'd say the official R&D for this fix appears to be @grnamin!

I wasn't expecting a response until Monday -- props to Rival -- any individual / company willing to respond to a customer late on a Saturday afternoon after hours is beyond ok in my book. Like or dislike the product, simply standing behind what you do goes a long way...

Cheers folks. Happy grinding.
~AB

ps. @Stu_Barnes should these make their way to the "resources" page or just leave them here?

Looks exactly like grnamin’s fix. lol. They might owe you some royalties.

grnamin · Sep 15, 2024

wolftimj said:
Looks exactly like grnamin’s fix. lol. They might owe you some royalties.

Nah! Just glad to help any way I can.

TahoeGren · Sep 15, 2024

I just notched mine this afternoon. My cut didn’t go as far in as Rival’s template. I basically measured about 1 inch around the spot where the diff hits and also angled the corner. Note that with the cut, the bracket will be wider than the skid, and it will show a bit.

Rival support has been great, and it’s awesome that they’re offering replacements. I liked my mod just fine and asked them to take me off the list.

parb · Sep 15, 2024

I think I'll do the mod, if it looks good I'll take myself off the list.

Zimm · Sep 15, 2024

parb said:
I think I'll do the mod, if it looks good I'll take myself off the list.

It’s a skid plate. If it doesn’t look bad, you wasted your money.

74CampySuperRecord · Sep 15, 2024

Zimm said:
It’s a skid plate. If it doesn’t look bad, you wasted your money.

Lol. A friend of mine told me that if he sees my Grenadier that he is going to crawl underneath it to see if I am using/ abusing it correctly.

Search

Search

Underbody Protection from Rival

grnamin

Zimm

Ovrland Bill

74CampySuperRecord

parb

LeonD

74CampySuperRecord

Nadir5

LeonD

Ovrland Bill

e_k_powell

grnamin

74CampySuperRecord

AUDIOBUS

Attachments

wolftimj

grnamin

TahoeGren

parb

Zimm

74CampySuperRecord

Similar threads

Latest posts

Share this page