The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Clicking noise ?

Local time
4:24 AM
Joined
Aug 9, 2023
Messages
364
Reaction score
731
Location
Australia
Solid state relays are normally rated the same as mechanical relays and some can take more, up to 50amps in some instances. The cost is what most people baulk at because a good solid state relay can be well over three times the price of an electro-mechanical relay. Some of the catalogues to reference are the online Hella Relays and Relay Devices or E-T-A Relays For Vehicles. Most auto relays are based on the ISO system.
 

Flinthills

Grenadier Owner
Local time
10:24 PM
Joined
Sep 29, 2023
Messages
12
Reaction score
19
Location
USA
I also have a ticking noise, but it sounds like it is coming from the infotainment screen, or behind the dash. It seems to happen every time I start the truck, then seems to go away the longer I drive it? When I test drove one of the demos, I noticed the same noise, and was hoping that my car when it arrived, did not have the same issue.
 

Krabby

Global Grenadier 76
Forum Moderator
Grenadier Owner
Lifetime Supporter
Local time
11:24 PM
Joined
Nov 5, 2022
Messages
5,076
Reaction score
9,717
Location
New Jersey, USA
I also have a ticking noise, but it sounds like it is coming from the infotainment screen, or behind the dash. It seems to happen every time I start the truck, then seems to go away the longer I drive it? When I test drove one of the demos, I noticed the same noise, and was hoping that my car when it arrived, did not have the same issue.
Did you disable the ADAS?
 

bradshow

Grenadier Owner
Forum Donor
Local time
11:24 PM
Joined
Jan 24, 2024
Messages
55
Reaction score
76
Location
Charlotte, NC, USA
I also have a ticking noise, but it sounds like it is coming from the infotainment screen, or behind the dash. It seems to happen every time I start the truck, then seems to go away the longer I drive it? When I test drove one of the demos, I noticed the same noise, and was hoping that my car when it arrived, did not have the same issue.
I’m getting a creaking/vibrating sound that seems to be coming from the infotainment screen. It stops when I gently push or pull on the screen. Is this what you are experiencing and has anyone else had the issue?
 

Chadd7

Grenadier Owner
Local time
11:24 PM
Joined
May 17, 2023
Messages
602
Reaction score
809
Location
NJ, USA
I’m getting a creaking/vibrating sound that seems to be coming from the infotainment screen. It stops when I gently push or pull on the screen. Is this what you are experiencing and has anyone else had the issue?
I have the same issue. I cut a piece of paperboard to slip between the infotainment unit and the base attachment in the rear and it seems to have helped. If I knew how to disassemble the unit, I would take it off the base and put felt tape all around the base and then reassemble.
 

bradshow

Grenadier Owner
Forum Donor
Local time
11:24 PM
Joined
Jan 24, 2024
Messages
55
Reaction score
76
Location
Charlotte, NC, USA
I have the same issue. I cut a piece of paperboard to slip between the infotainment unit and the base attachment in the rear and it seems to have helped. If I knew how to disassemble the unit, I would take it off the base and put felt tape all around the base and then reassemble.
That’s exactly what I was gonna try. Thanks
 
Local time
11:24 PM
Joined
Jan 20, 2023
Messages
142
Reaction score
319
Location
Belmont, MA
It would require a substantial amount of time to run the wires to under the hood only to come back... Unless you rewired the entire wiper system, which just seems silly.

You could always try a piece of 3M Thinsulate or similar as a sound dampener over the relays under the seat if it really bothers you
santoprene is a good sound deadening material
 

DCBNA

Grenadier Owner
Local time
10:24 PM
Joined
Feb 17, 2024
Messages
12
Reaction score
12
Location
Nashville, TN, USA
I noticed the windshield wiper click today, I couldn't figure out what it was and then I noticed it was synchronized with the wipers. Mine only does it on the intermittent setting when the relay cuts on and off. I thought I was going crazy for a minute and pulled the car over to look. Turned the volume on the radio up and went about my day.
 

Noriboo

Grenadier Owner
Local time
8:24 PM
Joined
Feb 18, 2024
Messages
5
Reaction score
4
Location
USA
I noticed that today as well. Is there any way to fix that or mute the noise?
 

Voader - Oudersopzwier

Grenadier Owner
Local time
5:24 AM
Joined
Jun 28, 2023
Messages
309
Reaction score
600
Location
Belgium - Kortrijk
This will do
 

Attachments

  • IMG_3937.jpeg
    IMG_3937.jpeg
    68.5 KB · Views: 46

bbq4133

Grenadier Owner
Lifetime Supporter
Local time
11:24 PM
Joined
Feb 20, 2024
Messages
198
Reaction score
303
Location
Delaware, USA
I first heard this on Friday (I always have the radio on, and didn't this time) and I got SOAKED creeping around the truck in the rain to figure out what on earth was happening.
 

shiv.nandak

Grenadier Owner
Local time
11:24 PM
Joined
May 31, 2023
Messages
224
Reaction score
216
Location
Pittsburgh, PA, USA
I also have a ticking noise, but it sounds like it is coming from the infotainment screen, or behind the dash. It seems to happen every time I start the truck, then seems to go away the longer I drive it? When I test drove one of the demos, I noticed the same noise, and was hoping that my car when it arrived, did not have the same issue.
I have the same issue. I cut a piece of paperboard to slip between the infotainment unit and the base attachment in the rear and it seems to have helped. If I knew how to disassemble the unit, I would take it off the base and put felt tape all around the base and then reassemble.
I’m getting a creaking/vibrating sound that seems to be coming from the infotainment screen. It stops when I gently push or pull on the screen. Is this what you are experiencing and has anyone else had the issue?

The cover is actually easy to take it off, 4 clips on the back and 2 small tabs on the side. I started on one corner with a trim tool and worked my way around until I popped all the tabs.

Edit: No noise after I removed the cover. I think I need a thin strip of felt tape above the ledge in the back.
 

Attachments

  • IMG_5099.JPG
    IMG_5099.JPG
    1.4 MB · Views: 38
  • IMG_5100.JPG
    IMG_5100.JPG
    2 MB · Views: 40
  • IMG_5101.JPG
    IMG_5101.JPG
    1.7 MB · Views: 40
  • IMG_5102.JPG
    IMG_5102.JPG
    2.2 MB · Views: 39
Last edited:

anand

Photo Contest Winner
Forum Moderator
Grenadier Owner
Lifetime Supporter
Local time
11:24 PM
Joined
Mar 12, 2023
Messages
3,014
Reaction score
4,902
Location
Maryland
I used a strip of 1/8" speaker foam tape across the front-facing edge of the screen (where that ridge is) and it cured any rattles I had from there
 
Back
Top Bottom