Yes, both were required. It is only way to remove small allen bolts from airbag indicator light in order to gain access to plug. The camera shroud comes directly down and used thin plastic removal tool to pop headliner side first. As you can see in photo these are plastic clips. I then used same tool starting from aux light side to slide plastic tool in towards clip between interior light switches and then again for each side of the lights. There was some slack from airbag plug so pulled that back towards fake speaker hole and made the connection for wiretap & then pushed back in accordingly. Maybe a 1hr project.
Confirmed. When vehicle powers up the 12v power is feed from indicator light to radar. No matter passenger or not.
Looks like they are working on INEOS specific mount. What model is the one in your picture. Love their mounts. I have in my other car.
Looks like blendmount has Gren mount. One left. I grabbed one.
Hah I got an email from them as well a little while ago but I'm trying a different mount for my V1; my 14hr drive home from the dealer with the factory V1gen2 suction cups was less than ideal given the angle of the windshield
Thank you for posting this LKC, it was very helpful, just finished working mine.
