Bison Gear Ineos

Jeffrey said:

So, how would you drive around with your weapon before you had this shelf?

Click to expand...

Bison-Gear said:

Hello, it's Paweł from Bison Gear.

I'm excited to share that we're collaborating with Grenadier to bring you new and innovative products.
Our initial set of accessories is already on the market, and we're working on expanding the range even further.
Stay tuned for a comprehensive selection coming your way soon!

View attachment 7840095View attachment 7840096

View attachment 7840097

Click to expand...

globalgregors said:

Thanks Pawel and @Bison-Gear , cargo shelf received and installed. Appreciate the prompt fulfilment, good instructions, packaging and fast shipping.

For those with the more rear-mounted cargo barrier fitted (such as in a Trialmaster) the shelf well install in a slightly rearward position which can attach with 4 of the 6 provided fasteners (unless you’re prepared to drill additional holes).

No problem though, it’s perfectly stable just with the 4 and permits enough standoff from the barrier to allow the barrier to bounce around on its sprung mounts without causing a rattle.

@Bison-Gear it might be worth considering an additional couple of holes in the design for this use case.

Solid as a rock however and for us a very convenient spot for some Frontrunner chairs, a table, solar blanket, tent, sleeping bags etc.

Click to expand...

DaBull said:

Hi globallgregors, Couple questions on the Bison interior roof storage rack.
1 - Is it steel or aluminum?
2 - I purchased the rear seat recline brackets, which push the top of the rear seat back, back towards the rear 2.17".
How far back does the Bison rack set from behind the front of the headrest and can it be modified to push it back further towards the rear so it
is not to close to your head when sitting in the rear seat?
DaBull

Click to expand...

DaBull said:

Hi globallgregors, Couple questions on the Bison interior roof storage rack.
1 - Is it steel or aluminum?
2 - I purchased the rear seat recline brackets, which push the top of the rear seat back, back towards the rear 2.17".
How far back does the Bison rack set from behind the front of the headrest and can it be modified to push it back further towards the rear so it
is not to close to your head when sitting in the rear seat?
DaBull

Click to expand...

DaBull said:

Hi globallgregors, Couple questions on the Bison interior roof storage rack.
1 - Is it steel or aluminum?
2 - I purchased the rear seat recline brackets, which push the top of the rear seat back, back towards the rear 2.17".
How far back does the Bison rack set from behind the front of the headrest and can it be modified to push it back further towards the rear so it
is not to close to your head when sitting in the rear seat?
DaBull

Click to expand...

[ Adam ] said:

I find this Bison tray very intriguing, can someone take some measurements and let me know if the following might fit? I'm especially curious if it might be strapped underneath the tray, keeping the upper area open for storage.

View attachment 7847045

Click to expand...

FlyersFan76 said:

I drove with 1 safari window removed for the first last weekend. I got more air coming in the cabin than I do with any convertible I have ever driven. This shelf is going to be real helpful storing the windows as others have said.

Click to expand...

K1LL3M said:

Would someone with the shelf, mind posting a measurement from the floor to bottom of shelf.

Trying work out clearance available for drawer and fridge install below to make sure it all fits.
Cheers

Click to expand...

RobS said:

View attachment 7847145

Click to expand...

RobS said:

View attachment 7847145

Click to expand...

Bison-Gear said:

View attachment 7847216
View attachment 7847217

Bison Gear also offers under the shelf chairs compartment.

Click to expand...