The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Floor trim to access wiring tray

Cam

Grenadier Owner
Lifetime Supporter
Local time
2:08 PM
Joined
Nov 21, 2021
Messages
58
Reaction score
68
Location
Brisbane QLD, Australia
Any ideas how to remove this piece under the plastic floor trim.
Removal of bolts yields little movement or release in any obvious way.

I want to run some wiring inside through to the rear (UHF Antenna cable).

Maybe I'm missing something, maybe there's a better way?

Any help is appreciated.

Cam


IMG_6010.jpeg
 

DenisM

Grenadier Owner
Lifetime Supporter
Local time
5:08 AM
Joined
Jan 26, 2022
Messages
2,198
Reaction score
4,383
Location
Brisbane, Queensland Australia
Hi @Cam
Remove the floor mats then remove the base "lino" floor covering as if you were trying to access the drain plugs in the floor. There's a second lot of nuts (x2 in the front section -10mm socket) under the "lino". Same further back beside the front seat and the door sill in the passenger section...20230927_103904[1].jpg
 
Last edited:

Cam

Grenadier Owner
Lifetime Supporter
Local time
2:08 PM
Joined
Nov 21, 2021
Messages
58
Reaction score
68
Location
Brisbane QLD, Australia
Hi @Cam
Remove the floor mats then remove the base "lino" floor covering as if you were trying to access the drain plugs in the floor. There's a second lot of nuts (x2 in the front section -10mm socket) under the "lino". Same along beside the front seat and the door sill in the passenger section...
Thank you!!
 
Back
Top Bottom