This pocket guide shows wiring point https://grenadier4x4.uk/category/electrical/
This pocket guide shows wiring point https://grenadier4x4.uk/category/electrical/
Ah - good question. The pic is of my overhead panel. I did read somewhere that the 'pwr' switch simply keeps the USB port live for charging even when the ignition switch is off. But that should still leave me with one external connector somewhere...
That's the left side
So you only have the 10A outlet on the right hand side as you are looking into the engine bay
My jumper psot is on the RH side of the vehicle i.e. the LH as your stand looking into the engine bay.
Perspective is everything Dave! RHS of the vehicle. LHS as you look under the bonnet.
Good, good, but where is it? I simply can't find it.
Don't look for an outlet, look for two wires attached with some insulation to a big bundle of wires, left side of the vehicle unde the bonnet, but perhaps you know this.
Ah, yes, forgot there could be a difference between left hand and right hand drive.
I think there must be another somewhere that I haven’t looked for yet as there should be both 10a and 25a supplies as you haveAh, yes, forgot there could be a difference between left hand and right hand drive.
I'll have another look tomorrow to confirm, but no. See pic above. If we assume that side is for the 25A conne3ction, I have to really search hard on the other side...
According to your picture above you don’t have the high load auxiliary wiring but you should still have the 10a supply under the bonnet but not the 25a supply
The 10A should be there anyway. Ask your dealer, but sometimes they don't know either
The dealer has already been asked. Here is their reply :-" "
