What did you do with your Grenadier today?

[Bruce]

Wait I was told jackets were only available to non USA countries. Did anyone in the USA get promised one?

Yes

 

[anand]

Wait I was told jackets were only available to non USA countries. Did anyone in the USA get promised one?

I believe the fine print stated that only those who were reservation holders/pre-orders were supposed to get the jacket

 

[Deleted member 9052558]

I believe the fine print stated that only those who were reservation holders/pre-orders were supposed to get the jacket

That makes since as I wasn’t a reservation holder or a pre-orderer on neither of mine. Just as well as these jackets would probably cause easy printing, they look nice though.

 

[DaveB]

That makes since as I wasn’t a reservation holder or a pre-orderer on neither of mine. Just as well as these jackets would probably cause easy printing, they look nice though.

They are designed for people with strange body shapes.
You can only get them with chest measurements larger than waist measurements.
Doesn't make sense to me.

 

[AngusMacG]

Just placed an order w/Bison Gear for Right side cargo basket, Left side outer Molle panel, and 2 Jerry can holders. Taking advantage of the Free Shipping offer!

 

[Braydo]

I’m trying to find documentation on running a wire through that grommet but can’t seem to find it using search. Any suggestion or links?

Can you tell me how you feed the wiring through the rear power socket I am looking to do something similar?

Try this most excellent post:
https://www.theineosforum.com/threa...nture-communications.12410554/post-1333201317

 

[Deleted member 9052558]

Try this most excellent post:
https://www.theineosforum.com/threa...nture-communications.12410554/post-1333201317

 

[Clark Kent]

They are designed for people with strange body shapes.
You can only get them with chest measurements larger than waist measurements.
Doesn't make sense to me.

For the early adopters who committed to their Grenadier pre-production, like me, there is also a reversible Alpine style with built in mittens. Sale is limited to MY23 low VIN owners.

 

[Tazzieman]

For the early adopters who committed to their Grenadier pre-production, like me, there is also a reversible Alpine style with built in mittens. Sale is limited to MY23 low VIN owners.

You can't get them now
Cancelled

 

[Clark Kent]

You can't get them now
Cancelled

Aahh, you snooze you lose

 

[Tazzieman]

Aahh, you snooze you lose

The Woolies at Lake Taupo didn't have them either.
But it doesn't matter when you're kicking back with a G&T

 

[mad1]

Try this most excellent post:
https://www.theineosforum.com/threa...nture-communications.12410554/post-1333201317

Thanks, much appreciated exactly what I was looking for..

 

[Bluesurf]

Today I received some stuff for my Grenadier. I bought the Grab handle(100% Aluminum) from AgileOffRoad.com all in, it cost $230. Del &Tax included. Very reasonable, the quality surpasses the factory (Plastic) The grip feels outstanding. The slot in the handle is for a phone or iPad hook up. A very good idea. I also received carpets I purchased from AliExpress.com. I found a guy and paid $124.53 now they are all $169.00 before tax. I should get today or tomorrow my Carbon Fiber Grill delivered, it has been at my local post office for several days. Today in my USPS I should get the black piano switch covers to match the doors in black.
Here are some pictures of the work. I painted the screws in tan color so they don't stick out. You can see on the USB-C 3.0 iPhone charger, there is one for the passenger too. I'm I should have the Stainless brake pad any day, its in the local postal office. I have a nice black frame in the mail today to finish off the gate/garage opener.

 

[Reducs]

@Bluesurf Any trouble popping off that A-pillar trim piece for the grab handle? Mine came in yesterday, so that's on my to-do list for the weekend. I was planning on doing it without removing it, but taking it off looks preferable.

 

[TCMColorado]

@Bluesurf Any trouble popping off that A-pillar trim piece for the grab handle? Mine came in yesterday, so that's on my to-do list for the weekend. I was planning on doing it without removing it, but taking it off looks preferable.

The a-pillar trim piece is very easy to remove. Pop off the cover near the top. Take out a single T25 torx bolt and the trim piece then pulls off with little force.

 

[Deleted member 9052558]

Today I received some stuff for my Grenadier. I bought the Grab handle(100% Aluminum) from AgileOffRoad.com all in, it cost $230. Del &Tax included. Very reasonable, the quality surpasses the factory (Plastic) The grip feels outstanding. The slot in the handle is for a phone or iPad hook up. A very good idea. I also received carpets I purchased from AliExpress.com. I found a guy and paid $124.53 now they are all $169.00 before tax. I should get today or tomorrow my Carbon Fiber Grill delivered, it has been at my local post office for several days. Today in my USPS I should get the black piano switch covers to match the doors in black.
Here are some pictures of the work. I painted the screws in tan color so they don't stick out. You can see on the USB-C 3.0 iPhone charger, there is one for the passenger too. I'm I should have the Stainless brake pad any day, its in the local postal office. I have a nice black frame in the mail today to finish off the gate/garage opener.

Nice. I will be replacing mine as well soon just waiting on the next Agile package arrival. It seems like every week I’m getting a package delivered from someone (Owl, Agile, OK4WD, Design Build Go, etc etc)(isn’t it awesome we have so many companies making products for our vehicles?!). It’s sooooooo damn addictive once you start down this trail we have of customizing to not being able to stop!!!! Maybe we start a group session to help each other break the habit? No bs!! Btw, I can’t wait to get the Agile handles installed, I just wish they added a little piece to cover the screw holes.

 

[MrWiggleBottom]

I am keen to get the Wolfbox setup and get grid of OEM mirror. I’ve tried to figure it out from posts on the forum what parts are best to order is (in Australia), where from, and who would be experienced in fitting to Grenadier around Brisbane. Can anyone help me with recommendations as this old brain just gets more confused the more I read.

Yank here so if you are okay with me helping you Im here for you. I just installed mine and the worst part is running the wire from the back. I would suggest getting a OBD power plug tho. Amazon or Wolfbox have them. Wolfbox has a HUGE transformer box for some reason so you need to find a spot for it. Amazon has a million better ones. if I could do it again I think I would mount the camera in the rear on the little door. The Rubber wire tube from door to body has much more room in it. But I can send a picture on how I ran the wire if you need it. hope this helps. Cheers

 

[Bluesurf]

This evening in the mail were my door switch Piano Black panels. They are on and here are front and a rear. All four are done. My Carbon Fiber Grill is scheduled for tomorrow. And my Bullbar Roo Bar from OwlOutdoor is shipped. A few other things and this ride is done.

 

[Znarfgh]

Started work on my side steps.

 

[frcnducted]

Started reinstalling rear interior panels after rear cabin pressure vent flap rattle mod/fix. Added some sound insulation while it was opened up.