The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Shovel Side Mount Using Utility Belt

Thanks to all the advice here, I have mounted a shovel onto the utility belt.

I used a pair of https://www.z1motorsports.com/misce...l-quickfist-riser-by-z1-off-road-p-44901.html

Attached to the utility belt using https://www.aliexpress.com/item/1005006954198737.html

I chose the M6 bolts, so I didn't have to drill out the risers.

The shovel I used was a https://www.roofracksgalore.com.au/spade-black-1065mm-handle-blue-grip

Next step is to apply some type of grip tape to the handle (where the QuickFists grab it) to prevent the shovel from rotating and touching the bodywork. 🙂

View attachment 7873501View attachment 7873502View attachment 7873503View attachment 7873504View attachment 7873505
Nice setup! What are the 2x vertical bars everything is mounted to called / made by? They look nice and light compared to the massive molle panels from Alu-cab and the like.
 
Nice setup! What are the 2x vertical bars everything is mounted to called / made by? They look nice and light compared to the massive molle panels from Alu-cab and the like.
Thank you. 🙂

Universal side carrier from @Black Sheep.

 
Bulletproof side belt alternative if you have Leitner side mounts. Just drill 2 holes

IMG_5159.png
IMG_5160.jpeg

Solid and goes anywhere
IMG_4724.jpeg
IMG_4825.jpeg
 
Back
Top Bottom