The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Rear storage & bed

Local time
11:25 PM
Joined
Sep 26, 2024
Messages
2
Reaction score
1
Location
Derbyshire, UK
Hey,

Looking for a rear drawer or bench system for the rear of my 5 seater that works with the seats folded flat.

Just picked up my Ineos and would like to use for sleeping in on some trips

Does anybody have any ideas that work with the seats folded?
Ideally in theUK.


Cheers

George

tempImageLVKHNy.jpg
 
  • Like
Reactions: Max

IG Pop

Grenadier Owner
Local time
12:25 AM
Joined
Jun 8, 2022
Messages
174
Reaction score
113
In the IG configurator one can now find the following under Utility - Interior cargo:

LOADSPACE DRAWER
£1,961.00

Large, lockable drawer system which can carry up to 90kg of contents inside. In addition, it enables a full flat floor in the loadspace when the rear bench seat is folded forward.
Please note, the Interior Utility Rails must be removed from the vehicle in order to fit the Loadspace Drawer System in place, as described in the fitting instructions.
 
  • Like
Reactions: Max

Ovrland Bill

Grenadier Owner
Lifetime Supporter
Founding Guard
Local time
3:25 PM
Joined
Sep 25, 2021
Messages
315
Reaction score
335
On the cheap (if you are not over six feet tall):

1. Remove bottom cushion(s) from rear seat (they are only held in place by a few fasteners).

2. Fold rear seat back(s) flat.

3. Place 7” tall storage boxes in loadspace behind (and even with tops of) folded rear seatback(s).

4. Stack loose gear in void between front and rear seats.

5. Add 6 foot long mattress, pillow, and mints.
 

Attachments

  • IMG_9076.jpeg
    IMG_9076.jpeg
    3.3 MB · Views: 0
  • IMG_9077.jpeg
    IMG_9077.jpeg
    3.5 MB · Views: 0
  • IMG_9078.jpeg
    IMG_9078.jpeg
    2 MB · Views: 0
Back
Top Bottom