Pizza Cutters?

[ADVAW8S]

@Boise looking forward to your feedback. I'm thinking the same tires for the QM.

 

[Boise]

@Boise looking forward to your feedback. I'm thinking the same tires for the QM.

I've only got about 1,000 miles on them so far but I'm really happy with them.

Have you placed your QM order yet?

 

[Shaky]

Yes he has

 

[DaBull]

Couldn’t be happier with the Mickey Thompson 255/85R17s!
View attachment 7858533View attachment 7858534View attachment 7858535

Hi Boise, Looks nice, what size? DaBull

 

[ADVAW8S]

I've only got about 1,000 miles on them so far but I'm really happy with them.

Have you placed your QM order yet?

Yes on 4/10, the date the order books opened. Expected delivery in Q4 but you probably know better on the delievery schedule for QM. I heard from Elliot Bay and they said Sept the test vehicles will arrive.

 

[ADVAW8S]

Hi Boise, Looks nice, what size? DaBull

They work out to be 35 by 10

 

[Boise]

Hi Boise, Looks nice, what size? DaBull

They are 255/85R17s. They physically measure 34.5" x 9"

 

[Paco Garcia]

They are 255/85R17s. They physically measure 34.5" x 9"

They look very good, have you had to raise the car or do they fit with the original springs, if they are with the original springs have you checked if they rub in any situation, on the other hand have you had to approve the tires or do you not have them there problems with that, here in Spain you cannot exceed 3% of the diameter of the original wheel, if it exceeds it, a technical reform project must be carried out. Greetings Paco

 

[Tinerfeño]

They are 255/85R17s. They physically measure 34.5" x 9"

Where do you get this 9"? If one inch is 25,4 mm 255 mm should be quite near of 10"

 

[Paco Garcia]

Being strict, the tire size would be:

255/85 R17 is equivalent to 865 mm of total wheel height.
(255x85%x2) + (17 x 2.54) = 865mm

and this in inches:

865mm/2.54 = 34.05 inches
255mm / 2.54 = 10.03 inches

so we would be talking about 34"x10" (34.05 x 10.03)

Correct me if I'm wrong. Greetings Paco

 

[j3t3r]

Couldn’t be happier with the Mickey Thompson 255/85R17s!
View attachment 7858533View attachment 7858534View attachment 7858535

Did you need a lift to fit those ?

 

[Boise]

Did you need a lift to fit those ?

Yes. They definitely would have rubbed without it.

 

[anand]

Yes. They definitely would have rubbed without it.

Technically, if they fit with the Eibach springs at full compression, then they should fit stock at full compression as the bump stops and shocks are not altered with just the Eibach setup; sure static height is higher, but at full stuff it should be at the same position

 

[Boise]

Technically, if they fit with the Eibach springs at full compression, then they should fit stock at full compression as the bump stops and shocks are not altered with just the Eibach setup; sure static height is higher, but at full stuff it should be at the same position

Agreed. Assuming that these lifted coils will compress enough to even reach the bump stops .

 

[shiloh]

View: https://youtu.be/ULmH9ggm5Xo?si=sigfjdpe_dIadwRl