NA Bull Bar

[GPFACTOR]

Happy Friday!

 

[Asjtex]

I was just curious as to the information surrounding bull bar in North America (US) specifically. It seems as though the group consensus is that we will not receive that option here. It is not on the configurator for the US, but it is for Australia, most countries in Africa, and most in the Middle East.

I understand that in the Europe there are legal obstacles that would prevent it from being factory fit, but in the US, the G class has either lower or upper brush guards, and a handful of other vehicles could be fitted from the factory (or dealer) with them, too (like some Land Rovers, or even the Tahoe/Suburban until about 2011).

Is this all speculation, and the fact that it is not an option on our configurator? Or is there more that I have missed?

I particularly like the bull bar… in fact, there is not a single vehicle in my family that is not fitted with a replacement winch bumper or brush guard, from my wife, to my brother to either of my parents! With the exception of the sedans. More upside to the protection and utility than not for my use…

I bought the bull bar and installed it myself about 5 months ago. As stated in a previous post I had absolutely no sensor issues and was pleasantly surprised how beefy this thing was. I’ve seen a handful aftermarket bull bars and none are as robust. Super heavy guage and strong mount points.

 

[Asnes]

Happy Friday indeed. My GP bull bar arrived this week while I was traveling and is sitting in my garage now ready for install tomorrow morning

 

[Asnes]

Got my GP kangaroo bar installed to be safe from all the kangaroos in North America.

The quality is super high. Very top notch product / precisely engineered.

Very happy with the outcome and investment.

 

[Tx246]

I am currently in LA, but was in Sherman Oaks earlier today.

I saw an Eldoret Blue/black roof in my rear view mirror and immediately had to smile.

However, it also had something I have never seen, it had a lowered brush bar, very much like the Current G63 Style. It was down low and painted Eldoret Blue. It looked pretty cool and way different, but had already driven past before I could get a picture.

Has anyone seen this before, I would be interested to see more of how it was done or who did it.

 

[Loc Nar]

Dissent Off-Road is getting close to their release of a Winch/Bumper/Bull Bar offering:

More info here.

 

[Loc Nar]

Dissent must be getting closer to the release of their bumpers, since they just dropped this video yesterday featuring their front bumper with bull bar plus their rear bumper with a swinging gate for the spare plus a swinging ladder:

 

[Loc Nar]

Also, here's a quick vid of Road Armor's bumper/bull bar and rear bumper offering:

I'm digging how the Road Armor bull bar is solidly welded to the bumper as opposed to being bolted on. I see that even Dissent's is bolted on.

 

[Zimm]

Also, here's a quick vid of Road Armor's bumper/bull bar and rear bumper offering:

I'm digging how the Road Armor bull bar is solidly welded to the bumper as opposed to being bolted on. I see that even Dissent's is bolted on.

the brush bars are welded to a plate, that is bolted on with 4 bolts. the welds will fail on all of these including road armors before the fasteners will. of course, if youre in a situation where you're close to this being an issue, youre rather screwed anyway. the one i designed for my lx470 was quick release with two bolts each side in double sheer, and dropped down to be a game carrier for deer. I wanted to make a second unit that was a rod holder, but never got to it. the advantage of a simple weld on, is the production cost for the unit as a whole is lower. the downside is, the lack of versatility.

 

[Loc Nar]

the brush bars are welded to a plate, that is bolted on with 4 bolts. the welds will fail on all of these including road armors before the fasteners will. of course, if youre in a situation where you're close to this being an issue, youre rather screwed anyway. the one i designed for my lx470 was quick release with two bolts each side in double sheer, and dropped down to be a game carrier for deer. I wanted to make a second unit that was a rod holder, but never got to it. the advantage of a simple weld on, is the production cost for the unit as a whole is lower. the downside is, the lack of versatility.

To be clear, you're referring to Dissent's offering as being bolted on. I dunno, man. If I had my druthers, I think I would want a unibody approach like Road Armor's to remove all doubt in my mind. I really wanted an ARB unibody offering like the one on my daughter's old Land Cruiser, but ARB is not making them for the Grenadier. I got to see first hand how freaking indestructible ARB's bar was when my daughter had parked her LC on the street in front of my house and an elderly neighbor driving down our street passed out behind the wheel and his car tried to pick a fight with the LC. It sideswiped her car, which woke the neighbor up, whereupon he turned the wheel sharply to the left. At that point his car said, "Let's go!" to the front right corner of the LC and the ARB bull bar bumper stepped up and said "You don't want nunna this!"

The most likely scenario in which I will need a bull bar in my neck of the woods is a deer strike, and I just like the idea of solid welds versus bolts.