The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Grenadier GVM and Quartermaster GVM

The GVM options that I know about, plus JMACX are also working on a package, not yet released.

SUSPENSION - GVM UPGRADE AUSTRALIA
  1. Expedition HQ GVM upgrade to 3800kg (Pre and Post Registration, but check), QLD registered cars only. EDIT: NSW GVM upgrade not possible at present;
  2. JRace Industries GVM upgrade to 4,000kg (Pre-registration) including rear axle capacity increase (Townsville Qld). Email: info@jraceindustries.com.au
  3. MORE4X4 GVM upgrade to 4,000kg (Pre-registration) here; and
  4. DMW GVM upgrade to 3,900kg (Post registration) here.
 
Last edited:
Take into account as a starting point before a GVM upgrade for the cab chassis version.

1. The cab chassis is ‘certified’ as the same kerb weight as the QM with tub. There’s a range of tests for certification in numerous jurisdictions. This is the official figure and INEOS must only communicate this.
2. The AUS NB1 Cab Chassis (base trim) Petrol has a kerb weight of 2,446kg & the Diesel has a kerb weight of 2,527kg both including 90% fuel tank full & all other fluids at the correct level.
3. The total gross weight of both versions is 3,550kg (GVM)
So as standard the load capability of petrol is 1,104 kg and diesel 1,023 kg.
That is without a GVM upgrade.
There are also different types of GVM upgrades and many people get the wrong ones or useless ones.
View: https://www.youtube.com/watch?v=Ny1ry3Of7Hc

View: https://www.youtube.com/watch?v=HmK6sOrJ5aY&t=496s

View: https://www.youtube.com/watch?v=aSYWq3Iou-A
 
Am I supposed to know what GVM is?
It means Gross Vehicle Mass.

The maximum weight of the Grenadier permitted under Australian road laws. The INEOS Grenadier has a GVM of 3550kg in Australia.

That GVM figure can be increased under certain conditions, normally with some mods and an engineering sign off.
 
The GVM options that I know about, plus JMACX are also working on a package, not yet released.

SUSPENSION - GVM UPGRADE AUSTRALIA
  1. Expedition HQ GVM upgrade to 3800kg (Pre and Post Registration, but check), QLD registered cars only. EDIT: NSW GVM upgrade not possible at present;
  2. JRace Industries GVM upgrade to 4,000kg (Pre-registration) including rear axle capacity increase (Townsville Qld). Email: info@jraceindustries.com.au
  3. MORE4X4 GVM upgrade to 4,000kg (Pre-registration) here; and
  4. DMW GVM upgrade to 3,900kg (Post registration) here.
More 4x4 is the JRace Industries Installer (same kit) and available both pre and post registration.
 
Another Robert Pepper video specifically breaks down the GVM tricks manufacturers play using the Grenadier as the example. Very useful and detailed information imo if you are planning to really load the Greandier down and need to figure out how and how much to increase the GVM. the tldr is that you cant really just take Ineos' (or any manufacturers) word for it at least at the limits

 
Last edited:
Back
Top Bottom