Contrast nose and rear door?

[RYAustralia]

I’m thinking of having the nose and small rear door wrapped in a contrast colour as per the early demo/prototype vehicles. Has anyone done this on their vehicle or for some other reason had experience removing the rear ladder and trim on the small rear door? I would be interested in any tips on dismantling and regarding what bits pop off/screw off/are glued on/break (or are liable to) when removed. Thanks

Up here in North QLD Australia wrap doesn't last too long, the UV protection is fine but the edges always fray within 2-3 years for most road cars, so I wouldn't do it here. Better option here would be to get a decent panel shop to repaint. Pricier, but only good option for the tropics I reckon.

 

[ECrider]

Up here in North QLD Australia wrap doesn't last too long, the UV protection is fine but the edges always fray within 2-3 years for most road cars, so I wouldn't do it here. Better option here would be to get a decent panel shop to repaint. Pricier, but only good option for the tropics I reckon.

makes sense.

 

[Tx246]

Anyone done this recently? Curious if there is a pattern available for the nose and what the best way to go about pulling the ladder with minimal work so it doesn’t risk getting messed up.

 

[Tx246]

Waiting to get pics in the sun, but this from this evening and based on best guesses from my local guys.

 

[ADVAW8S]

Waiting to get pics in the sun, but this from this evening and based on best guesses from my local guys.

What's the gray called? Looks like 3m bone grey.