The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Accessories PDF

“Roo Bar not compatible with front parking sensors…”

Doesn’t seem right.

Also the rock sliders seem a lot more significant than the steps just based on weight too!
 
“Roo Bar not compatible with front parking sensors…”

Doesn’t seem right.

Also the rock sliders seem a lot more significant than the steps just based on weight too!
Below is a picture I took showing the roo bar and the 4 parking sensors
Roo bar bolts onto/through the existing bumper bar so the parking sensors and airbag sensors are unaffected

1675809711498.png
 
I tried uploading the pdf to this post but it’s too large. 31mb, had a go at reducing it to 17mb but it’s nearly 50 very colourful pages!
 
“Roo Bar not compatible with front parking sensors…”

Doesn’t seem right.

Also the rock sliders seem a lot more significant than the steps just based on weight too!
Surely the roo bar IS the front parking sensor. Or maybe that’s just me…
 
Interesting
I was told the chequerplate was going to be a special polymer by Tom at Ineos.
This says Aluminium
View attachment 7802682
So, is it plastic with reinforcement underneath or Aluminium with no reinforcement? Or is it Aluminium with reinforcement underneath? If they are fitted by the dealer as indicated by the configurator is the reinforcement a myth?

I changed my spec when I read it was plastic (even if it is "special" plastic).
 
So, is it plastic with reinforcement underneath or Aluminium with no reinforcement? Or is it Aluminium with reinforcement underneath? If they are fitted by the dealer as indicated by the configurator is the reinforcement a myth?

I changed my spec when I read it was plastic (even if it is "special" plastic).
It is confusing.
I notice the load rating on the wings goes up from 90kgs to 150kgs when they are fitted
 
Below is a picture I took showing the roo bar and the 4 parking sensors
Roo bar bolts onto/through the existing bumper bar so the parking sensors and airbag sensors are unaffected

View attachment 7802680
Checked with my agent, who checked with INEOS, apparently they initially have issues with interference , but it has been resolved and it will work.
 
Back
Top Bottom