I present the Auto Start/Stop Temporary fix

IslandFalconer · Oct 16, 2024

bamanuke said:
corner torn from a business card works fine and is barely detectible

It does, but you don’t want it to slip in to the actual button housing. But that’s how I first did it.

Commodore · Oct 22, 2024

IslandFalconer said:
So, for everyone who wants Auto Start/Stop to stay off, I have a Jerry Rigged has worked for the last three days solution. I’d love to have longer term data, but 72 hours is what I have so far with no fault codes.

I bent a little sheet metal just thick enough to slid in under the button, than depressed the button, the Auto Start/Stop button now stays in the depressed position due to the friction of the little metal shim.

It is L shaped, so it can’t slip inside the button cavity.

I make no claim this is “good” or “not good” only that after 3 days it’s still in the “off” position.

Has anyone tried jumping the terminals on the back of the switch?

IslandFalconer · Oct 22, 2024

Commodore said:
Has anyone tried jumping the terminals on the back of the switch?

Might work but getting to the back of the switch is not easy

Commodore · Oct 22, 2024

IslandFalconer said:
Might work but getting to the back of the switch is not easy

Guessing the center panel doesn't just pull off?

Mad Hatter · Oct 22, 2024

The whole panel is an integrated unit with a single connector.its a ‘line replaceable item’ in aero speak, you can’t access the back of the switch

Mad Hatter · Oct 22, 2024

I only know that because I saw one for sale on eBay!

Eric · Oct 22, 2024

I present my auto stop/start fix

Dokatd · Oct 22, 2024

Eric said:
I present my auto stop/start fix

Work smarter not harder! Joking but not really.

My G life has dramatically changed now that all
I have to worry about is the speed limit clicks.

Mad Hatter · Oct 23, 2024

Mad Hatter said:
The whole panel is an integrated unit with a single connector.its a ‘line replaceable item’ in aero speak, you can’t access the back of the switch

Here are the images

Commodore · Oct 23, 2024

Mad Hatter said:
Here are the imagesView attachment 7874561 View attachment 7874562

It looks like there are screws holding the back cover on. I would think that you could jump the connectors for the switch where they attach to the PCB.

Dokatd · Oct 23, 2024

Commodore said:
It looks like there are screws holding the back cover on. I would think that you could jump the connectors for the switch where they attach to the PCB.

You absolutely can, you can solder a jumper on the circuit board. But that would kill any potential warranty and make the change effectively permanent. Placing the small clip in the button face functionally is just as effective and allows you to revert back in case you have a service related to the panel in the future. I will try to snap a pic of mine and post it, you really would have a hard time noticing it and it works 100% of the time.

But sure, once warranty expires I would be more likely to remove the panel and make the change permanent. In fact you could even cut the trace on the board and jump it there. Then add some wires to the switch side and utilize the switch for something completely different.

Zimm · Oct 23, 2024

See that thing. How that is constructed is why I'm not using any products that utilize the faux screws as mounting points. I think many people look at that and assume there is some sort of backing plate with individual switches. It's all just a modern dashboard like any other dashboard, built for show.

The nice thing is, they could condense that a bit and incorporate some cubbies and charging points and it would be reverse compatible.

IslandFalconer · Oct 23, 2024

Zimm said:
See that thing. How that is constructed is why I'm not using any products that utilize the faux screws as mounting points. I think many people look at that and assume there is some sort of backing plate with individual switches. It's all just a modern dashboard like any other dashboard, built for show.

The nice thing is, they could condense that a bit and incorporate some cubbies and charging points and it would be reverse compatible.

Exactly why I chose the owl mount.

Zimm · Oct 23, 2024

IslandFalconer said:
Exactly why I chose the owl mount.

Me to. it seemed like the best alternative since it sort of clamps and put the screws in sheer and not tension. I'm not worried about the plastic giving way. I just wish people could make a product without a massive brand on it.

Dokatd · Oct 24, 2024

Doesn’t get much simpler than that.

fredp45069 · Oct 24, 2024

IslandFalconer said:
So, for everyone who wants Auto Start/Stop to stay off, I have a Jerry Rigged has worked for the last three days solution. I’d love to have longer term data, but 72 hours is what I have so far with no fault codes.

I bent a little sheet metal just thick enough to slid in under the button, than depressed the button, the Auto Start/Stop button now stays in the depressed position due to the friction of the little metal shim.

It is L shaped, so it can’t slip inside the button cavity.

I make no claim this is “good” or “not good” only that after 3 days it’s still in the “off” position.

I liked your idea so much that I created one from a zip tie. I might switch it to black.

Skydance · Oct 24, 2024

Did some googling and the way to disable auto stop start it to disconnect the hood sensor. I’ve seen aftermarket products that plug into the sensors (maybe tricking them, to say it’s closed). Not tried on mine yet but wondering if warning lights will come on or continuous bongs.

IslandFalconer · Oct 25, 2024

Skydance said:
Did some googling and the way to disable auto stop start it to disconnect the hood sensor. I’ve seen aftermarket products that plug into the sensors (maybe tricking them, to say it’s closed). Not tried on mine yet but wondering if warning lights will come on or continuous bongs.

You’ll get a bong and an indicator the hood is open.

Search

Search

I present the Auto Start/Stop Temporary fix

IslandFalconer

Commodore

IslandFalconer

Commodore

Mad Hatter

Mad Hatter

Eric

Attachments

Dokatd

Mad Hatter

Commodore

Dokatd

Zimm

IslandFalconer

Attachments

Zimm

Dokatd

fredp45069

Attachments

Skydance

IslandFalconer

Similar threads

Latest posts

Share this page