With 260kg tow ball weight running 45psi. Rides with a lot more confidence, and level with van. When empty I leave about 20psi to keep shape. have Engle fridge, double draws and kelpie in the back
With 260kg tow ball weight running 45psi. Rides with a lot more confidence, and level with van. When empty I leave about 20psi to keep shape. have Engle fridge, double draws and kelpie in the back
I'm at 230/40/15psi
Hi Tazzieman
Just below the rear bumper
@GrenX to get the valves to that location what level of disassembly is needed? The whole rear bumper off?
I'm not GrenX but I installed mine. Simple answer is no, you can reach that location either by pushing the bumper material (plastic) down or from behind in the wheel well. No disassembly required.
This is correct you don't need to remove the bar to fit the valves, its easy and protected location from mud and dust. We have fitted some for clients where the petrol filler is but its more complicated install so I prefer the bar location.
