What's new
The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Has anyone installed an Anderson plug from the starter battery to the rear?

E

etbandit

Local time
3:35 PM
Joined
Sep 11, 2022
Messages
47
Reaction score
36
Location
Australia
If anyone has installed an Anderson plug from the starter battery to the rear, can you please share how you went about this with pics?

I'm looking to do the same.

Regards.
 
douggie

douggie

Grenadier Owner
Lifetime Supporter
Local time
2:35 PM
Joined
Apr 20, 2023
Messages
104
Reaction score
297
Location
Brisbane, AU
etbandit said:
If anyone has installed an Anderson plug from the starter battery to the rear, can you please share how you went about this with pics?

I'm looking to do the same.

Regards.
Click to expand...
Wired off the NATO plug relay live side (its is in the rear at the right hand side of the vehicle under the removable cover). Installed with an inline resettable fuse.
It has 500 Amp capability (and before the relay mean's it battery live and not controlled via the Internal Switch, or running the Engine requirement of the Winch Circuit on the 500Amp EXT Switch on the overhead switches)
 
Tazzieman

Tazzieman

Grenadier Owner
Lifetime Supporter
Founding Guard
Local time
3:35 PM
Joined
Sep 30, 2021
Messages
6,775
Reaction score
13,417
Location
Tasmania
etbandit said:
If anyone has installed an Anderson plug from the starter battery to the rear, can you please share how you went about this with pics?
Click to expand...
The NATO plug circuitry is good to tap into , but it requires a bit of effort and a few extra $ - more than just a couple of wires and cheap plugs.
The thread is here
 
higgo

higgo

Local time
3:05 PM
Joined
Jul 25, 2023
Messages
2
Reaction score
0
Location
Australia
etbandit said:
If anyone has installed an Anderson plug from the starter battery to the rear, can you please share how you went about this with pics?

I'm looking to do the same.

Regards.
Click to expand...
Etbandit, did you end up running an Anderson straight from the cranking battery?
I will, and just need to find the best way to run the cables....
 
E

etbandit

Local time
3:35 PM
Joined
Sep 11, 2022
Messages
47
Reaction score
36
Location
Australia
Good timing with the question as I'm currently in the process. Had to take the rear seats out and remove the rear driver side boot trims and wheel guards. Then run the Anderson +V cable from the spare 60A fuse to the rear bash plate via the route outlined in the photos. Anderson -V cable will terminate at chassis earth under the wheel arch. I'll also be installing a Redarc SBI12 between the 60A fuse and Anderson plug to kill power when the ignition is off as my Anderson will be used to charge the caravan battery and I don't wish to run the BCDC blue ignition wire all the way from the van to the car.

Hope this helps. If anyone has a more efficient solution, please chime in as I'm yet to crimp the lugs on and make the connections.

Screenshot_2024-03-25-13-12-51-40_e2d5b3f32b79de1d45acd1fad96fbb0f.jpg

IMG_20240326_092759.jpg
IMG_20240326_093033.jpg
IMG_20240326_092907.jpg
IMG_20240326_093545.jpg
 
M

Mark S

Local time
3:35 PM
Joined
Apr 24, 2023
Messages
1
Reaction score
0
Location
Australia
etbandit said:
Good timing with the question as I'm currently in the process. Had to take the rear seats out and remove the rear driver side boot trims and wheel guards. Then run the Anderson +V cable from the spare 60A fuse to the rear bash plate via the route outlined in the photos. Anderson -V cable will terminate at chassis earth under the wheel arch. I'll also be installing a Redarc SBI12 between the 60A fuse and Anderson plug to kill power when the ignition is off as my Anderson will be used to charge the caravan battery and I don't wish to run the BCDC blue ignition wire all the way from the van to the car.

Hope this helps. If anyone has a more efficient solution, please chime in as I'm yet to crimp the lugs on and make the connections.

View attachment 7849838
View attachment 7849834View attachment 7849835View attachment 7849836View attachment 7849837
Click to expand...
Did it all work out ok? Have you got any pictures of the finished wiring job?
 
douggie

douggie

Grenadier Owner
Lifetime Supporter
Local time
2:35 PM
Joined
Apr 20, 2023
Messages
104
Reaction score
297
Location
Brisbane, AU
My dealer wired the Anderson x 2 Red and Grey with outputs next to the 12pm flat on resettable fuses from the live side of the NATO supply. It’s way less copper. Comes from the starter battery and more likely to be shorted so resettable is cool.
IMG_3036.jpeg


And only involves taking the over wheel side cover off
 
Robert T

Robert T

Photo Contest Winner
Grenadier Owner
Local time
8:35 PM
Joined
Aug 4, 2023
Messages
73
Reaction score
193
Location
Lacey, WA, USA
douggie said:
My dealer wired the Anderson x 2 Red and Grey with outputs next to the 12pm flat on resettable fuses from the live side of the NATO supply. It’s way less copper. Comes from the starter battery and more likely to be shorted so resettable is cool.
Click to expand...
That's a good idea. @douggie do you have any pictures of where they mounted the Anderson plugs? This is my next project so I appreciate your post. Thanks
 
douggie

douggie

Grenadier Owner
Lifetime Supporter
Local time
2:35 PM
Joined
Apr 20, 2023
Messages
104
Reaction score
297
Location
Brisbane, AU
Robert T said:
That's a good idea. @douggie do you have any pictures of where they mounted the Anderson plugs? This is my next project so I appreciate your post. Thanks
Click to expand...
not a great photo in detail and I am away for the next few days so I’ll take better shot when I get back. You can see the red and grey Andersons next to the 12 pin flat
IMG_2960.jpeg

And here’s a more complete view of the witing

IMG_3213.jpeg

Regds D
 
E

etbandit

Local time
3:35 PM
Joined
Sep 11, 2022
Messages
47
Reaction score
36
Location
Australia
Mark S said:
Did it all work out ok? Have you got any pictures of the finished wiring job?
Click to expand...
Worked out well. Wired up as described in post #5. Finished product in photos below. Use 60A spare fuses in the littlefuse busbar, through to the redard SBI12 solenoid, then to the Anderson at the rear. SBI12 blue ignition wire to a minifuse piggyback and into fuse F121 or F122 (seat heater) to cut power when ignition is off. Ground to chassis earth.

Getting 43A charge when plugged into the caravan the lithium using a Redarc1240D (Note: Wired with 3B&S cable on the car side to reduce voltage loss but requires the use of a 120A Anderson plug. Original caravan cables is 7B&S)

Hope this helps.
 

Attachments

  • IMG_20240411_093215.jpg
    IMG_20240411_093215.jpg
    638.4 KB · Views: 51
  • IMG_20240411_093239.jpg
    IMG_20240411_093239.jpg
    546.5 KB · Views: 51
  • IMG_20240411_093307.jpg
    IMG_20240411_093307.jpg
    570.3 KB · Views: 50
  • IMG_20240411_093322.jpg
    IMG_20240411_093322.jpg
    782.5 KB · Views: 50
  • IMG_20240411_094512.jpg
    IMG_20240411_094512.jpg
    425.5 KB · Views: 49
  • Screenshot_2024-04-11-09-34-04-69_99c04817c0de5652397fc8b56c3b3817.jpg
    Screenshot_2024-04-11-09-34-04-69_99c04817c0de5652397fc8b56c3b3817.jpg
    294.5 KB · Views: 48
You must log in or register to reply here.

Similar threads

TheDocAUS
Battery Box Reviews - Australian focus
Replies
11
Views
720
TheDocAUS
TheDocAUS
LeeroyJ
NATO plug to Anderson Plug
Replies
12
Views
819
Psignore00
Psignore00
E
Is the NATO plug wire to the starter battery or to the Aux battery/120 SmartPass?
2
Replies
29
Views
1K
AnD3rew
AnD3rew
A
Trailer hitch wireing
Replies
2
Views
472
and1939
A
Snow678
Batterymanagement and Smartpass 120S with 250SE
Replies
10
Views
900
Snow678
Snow678
Forum Store
The officially unofficial podcast for INEOS Automotive Grenadier Works Podcast
INEOS Grenadier Configurator

Latest posts

Share this page

Back
Top Bottom