Do you need to run in Off Road mode to get your light bar to operate along with the front auxillary lights using the high beam/turn indicator switch on the steering column? I would like to use the high beam/turn indicator switch as a "defeat" so that in town I can use the high beams as intended from the factory. Then, when I switch the light bar switch on (EXT 5), the high beam lever operates the light bar as well. I will be mounting a 40" Baja Designs ONX6 light bar above my winch.
Grand treuil :
It would still need to be switched with high beam to be legal in Australia unless driving an amber fog light.
We don't need to be in off road mode to run them in Australia I think that is only in certain countries such as the US
Thank you!
I am planning to add front four 4" lights in to the front bumper bar. Can you share more information on how did you sync with the spots.
My lightbar is synced to the spots, the auto electrician used a relay, so when the spots come on the lightbar will also (assuming the EXT1 is switched on, as the 10 amp circuit powers the lightbar). Sorry I never saw the precise wiring.
not so. We get the same treatment as everywhere else in the world. The roof point right front for light bar is only to be used off road and is not switched by high beam. Be careful what you consider off road. All the beaches and inland tracks in Fraser, Moreton and Stradbroke island are designated roads.
Yes.
Post in thread '@ninetubes - overlanding build - western australia'
Hi, i want to do the same as you. Where is the easiest way to connect to the trigger?
Have a look at this:
This should help too:
