- Local time
- 7:51 AM
- Joined
- Oct 12, 2022
- Messages
- 313
- Reaction score
- 844
Hi, Mine came from Clive at Diginate - just drop him a line at sales@diginate.com
A perfect fit too!
Cheers
John
Hi, Mine came from Clive at Diginate - just drop him a line at sales@diginate.com
Ditto. I got red and black. I'm thinking about doing the nose and rear door in safety orange (I've seen some that were a softer dusty[?] orange color that I think looks great with the MM) like the prototypes were set up, and the black Lambda might look better than red contrasted against the orange.
Hi,Clive at Diginate has the dimension of the A as he did this for my bonnet, back door and wheel locker, he will be able to scale from what he made for me?Hi folks. I wonder if any of you can help with some letter dimensions for the Grenadier. I’ve emailed Clive at Diginate to see if I can get letters made up for the complete Grenadier embossed logo on the bonnet and rear wheel lockable box. I have now left my vehicle in Botswana and travelling back to U.K. for Christmas. I attach the message from Clive to explain what he needs.
“
Hi Dave,
We have never done any of the other letters before.
I have found a vector version of the main logo however this would be for the full logo rather than the indented area that the stickers occupy. The indented area has much squarer corners.
I have the dimensions for the indented A so I can try and use that as a point of reference for the other letters.
Could you measure two things for me your end? The height of the indented space and then the full height of the letter A. See attached
I can then use those two dimensions to scale the main logo against what I have and get a good idea of the space between the indented area and the full letter edge. I should then be able to make some indented letters and we can work form there.
Regards
Clive ”
View attachment 7835962
Thanks in advance
I used a stiff paper and my nails to etch a suitable profile off the pressed metal then used that as a template and cut it out of a vinyl A4 red sheet from eBay. Plenty of chances to manipulate and trim. See photos. I am also North Yorkshire - a Dentons Cars customer. Enjoy!
Well done! I used Clive at Diginate, I did the measurements and they fit perfectly. You have the right colour too and I am very happy with the Denton team!
Apologies Pete, I have only just spotted your message. Further up this string are the details for Clive at Diginate who created mine. Cheers, John
Hi , I have emailed Clive and he needs the the full height and width measurements of the A on the bonnet. He has the inside size of the A as has made up letters already but needs the outer dimensions of the indented A so that he can work out and scale the other letters. If someone could measure this please as I’m not with my vehicle until the new year. I will then get the full Grenadier lettering made up. Thanks
I was reading through this wondering if I should order a cricut for the kids this Christmas. They usually let crafty gifts stagnate in a pile but I might get some use out of one of these.
I bet you are going to buy your wife some useful power tool as well
This year it's more like "Here honey, I ordered you some side steps so you can get into the grenadier easier!"I bet you are going to buy your wife some useful power tool as well
I like that - looks like it takes the 'idiot factor' out until the sticker is positioned. Thanks for sharing
