Two fantastic looking rides for certain. I am a sucker for a sharp 90.I’m Dan, in Perth Western Australia.
Just swapped my 90 for a Trialmaster diesel.
Cracking on with fitting it out now.
Tends to depend upon beach use or not. And if you launch trailer boats into the sea...Agreed. That 90 does look like a really sorted piece of kit. With it being antipodean I would like to think there isn’t much rust on it either.
a bloke at work went def 110 to a new paj sport and is now eying off my grenny. he's been happy with his mitsy tooNice. I said goodbye to this little champ on the weekend in anticipation of my Grenadier arriving home this week. The Pajero Sport was amazing value for money and a much more capable 4wd than it has any right to be and I will miss some aspects of it (ACC for one and multiview cameras) but excited for my new beast. View attachment 7824326
plenty of honest use, but always clean and dried - absolutely zero signs of any rust. i hope its new custodian takes the same level of care over on the east coast.Agreed. That 90 does look like a really sorted piece of kit. With it being antipodean I would like to think there isn’t much rust on it either.
Update:I’m Dan, in Perth Western Australia.
Just swapped my 90 for a Trialmaster diesel.
Cracking on with fitting it out now.
Update:
33” tyres and 35-40mm suspension lift.
Seperate 150Ah lithium dual battery with redarc 50A charger and smart shunt under the back seat.
ORS Rear draws with 40l evacool draw fridge, ARB twin compressor and 2000W inverter.
Lazer driving lights, Stedi st-x roof light bar, both on the highbeam circuit.
Rhino roofrack with alucab 270 awning and led strip lights on roof circuit to second batt
Underbody rock lights for no good reason.
Raised Diff breathers.
Towpro elite
UHF with custom mount and roof mounted aerial.
Rear muffler delete for upcoming LR tankView attachment 7835031
View attachment 7835025View attachment 7835026View attachment 7835027View attachment 7835028View attachment 7835029View attachment 7835030
Albrite (nato plug) relay converted to manual activation for camper charging
Yes ebiach raised springs.Is that the eibach lifted springs? Also could you give a better side view photo please. How's clearance with the 33 on the rear door?
And lastly new overall height?
And do we know literage of aux tank coming with that muffler removed???
Great work @ninetubesUpdate:
33” tyres and 35-40mm suspension lift.
Seperate 150Ah lithium dual battery with redarc 50A charger and smart shunt under the back seat.
ORS Rear draws with 40l evacool draw fridge, ARB twin compressor and 2000W inverter.
Lazer driving lights, Stedi st-x roof light bar, both on the highbeam circuit.
Rhino roofrack with alucab 270 awning and led strip lights on roof circuit to second batt
Underbody rock lights for no good reason.
Raised Diff breathers.
Towpro elite
UHF with custom mount and roof mounted aerial.
Rear muffler delete for upcoming LR tankView attachment 7835031
View attachment 7835025View attachment 7835026View attachment 7835027View attachment 7835028View attachment 7835029View attachment 7835030
Albrite (nato plug) relay converted to manual activation for camper charging.
I believe in Austrila you guys can't run 35 on the street but do you think a 35 will fit with the lift?Update:
33” tyres and 35-40mm suspension lift.
Seperate 150Ah lithium dual battery with redarc 50A charger and smart shunt under the back seat.
ORS Rear draws with 40l evacool draw fridge, ARB twin compressor and 2000W inverter.
Lazer driving lights, Stedi st-x roof light bar, both on the highbeam circuit.
Rhino roofrack with alucab 270 awning and led strip lights on roof circuit to second batt
Underbody rock lights for no good reason.
Raised Diff breathers.
Towpro elite
UHF with custom mount and roof mounted aerial.
Rear muffler delete for upcoming LR tankView attachment 7835031
View attachment 7835025View attachment 7835026View attachment 7835027View attachment 7835028View attachment 7835029View attachment 7835030
Albrite (nato plug) relay converted to manual activation for camper charging.
I used M10x1.0 threaded pneumatic fittings and 8mm push tube. Same as the commercially available ones, but I had to search for correct metric threads. The usual 1/8” bsp ones are really close, but it’s not right and binds after a couple of threads.Great work @ninetubes
If I may...Was wondering what brand of raised diff breathers you installed, how you connected them to the axles (and presumably also the Transfer case and auto transmission?) and where they're "terminated" presumably in the engine bay...
Thanks!
Yes it was custom fabricated from a few 3” bends and a v-band clamp.Great work!
How does it sounds with the new straight pipe?
Can you post one video?
Is this a custom work?
Thanks
It’d be close. I wouldn’t like to say yes or no either way.I believe in Austrila you guys can't run 35 on the street but do you think a 35 will fit with the lift?
Thanks, the back locks like it would be tightIt’d be close. I wouldn’t like to say yes or no either way.