Black Sheep Ctek D250 charger bracket

Tomdoc said:

@Black Sheep

This is helpful, but in my 2 seater N1 the existing mount for the 120 Smartpass is too wide to allow the bracket to slide over it. I am not sure this will work. As you can see the mount has side lips and the new bracket simply won't fit over it. You can see my scratches !

I am presuming the folded over bits somehow slide alongside the mount? Perhaps they do in other types of IG but not in mine.

If I am being stupid let me know!!

View attachment 7823097View attachment 7823098

Click to expand...

BAS-Remaps said:

We made a bracket a while ago flat lazer cut plate, easy job.
Feel free to use any of the drawings.

This is for use with cars that have existing ~Smartpass 120s fitted.

Click to expand...

BAS-Remaps said:

We made a bracket a while ago flat lazer cut plate, easy job.
Feel free to use any of the drawings.

This is for use with cars that have existing ~Smartpass 120s fitted.

Click to expand...

bakepl said:

Just making this up now thanks, can you tell me any reason for the 3mm mounting holes for the top D250SE unit compared to the 6mm holes for the already installed Smartpass? cheers

Click to expand...

TheDocAUS said:

I noticed that also, but the holes on the finished plate all appear to be the same diameter.

Click to expand...

AnD3rew said:

View attachment 7823407View attachment 7823408View attachment 7823409

Click to expand...

TheDocAUS said:

Andrew

What is the diameter of the 8 holes used to mount the units?

Click to expand...

AnD3rew said:

@TheDocAUS just edited 3mm and 4mm

Click to expand...

Tomdoc said:

[

This is helpful, but in my 2 seater N1 the existing mount for the 120 Smartpass is too wide to allow the bracket to slide over it. I am not sure this will work. As you can see the mount has side lips and the new bracket simply won't fit over it. You can see my scratches !

I am presuming the folded over bits somehow slide alongside the mount? Perhaps they do in other types of IG but not in mine.

If I am being stupid let me know!!

Click to expand...

DCPU said:

Surely it slides over the top of the existing bracket as the holes all have to line up for the bolts to reach the captive nuts on the lower side of the existing bracket:
View attachment 7823423

Click to expand...

Tomdoc said:

Then it would lift the 120 too high and terminals would abut the lid of the battery box. There is only a small clearance. Anyway , have done it using the plate the other way around and all fine.

Click to expand...

Tomdoc said:

@Black Sheep

This is helpful, but in my 2 seater N1 the existing mount for the 120 Smartpass is too wide to allow the bracket to slide over it. I am not sure this will work. As you can see the mount has side lips and the new bracket simply won't fit over it. You can see my scratches !

I am presuming the folded over bits somehow slide alongside the mount? Perhaps they do in other types of IG but not in mine.

If I am being stupid let me know!!

View attachment 7823097View attachment 7823098

Click to expand...

Black Sheep said:

Hi Tomdoc
I apologize for not being able to respond immediately. On your report, we checked the matter and organized a two-seater. We have optimized the points mentioned, at the same time. In the case of the two-seater, we also found that the height of the bracket is not optimal and created an alternative solution. In your case, I would ask you to contact our customer support directly, so that we can send you a replacement product of the latest generation for the two-seater free of charge. (support@blacksheep-innovations.com)

Click to expand...

AnD3rew said:

From the Black Sheep website and the instructions they posted it looks like he has done the opposite to yours although there does look to be some differences to the underlying structure?
View attachment 7823458

Click to expand...