- Local time
- 7:56 PM
- Joined
- Nov 5, 2022
- Messages
- 2,169
- Reaction score
- 4,813
- Location
- Brisbane QLD, Australia
Sort of - it’s in the centre console where it’s largely useless.
Sort of - it’s in the centre console where it’s largely useless.
Ah cigar lighters...the stuff of old Rovers and Jags!
...the Puff of old Rovers and Jags!
The former , uphill as well!
As long as you can quickly delete the "I made a very bad decision offroad" clip, one that will void insurance
Don’t think so. Closest is centre box
No heated seats?!!!!! Heathen.Assuming the console switch segments are actually separate and individually fastened in place, AND, as someone else has already noted, the heated seats are not fitted, then their respective fascia plates are "begging" to be repurposed! Hopefully IA deliver on their promise of open access to wiring diagrams
View attachment 7802902
Not necessary... SE Queensland near the coast is 'sub-tropical'.... Most of the year it's between 20 and 30 deg C +/- 10deg C for the extremes in summer and winter.
. If I had the chance to live in the PNW I'd certainly order heated seats.
I have something similar based on a cheap first aid cabinet from Bunnings ("Big Box" hardware store chain in Australia) .. I built it for the Santa Fe diesel ...connected to a 100AH LiFePO4 deep cell. The red Anderson plug supplies (smart) alternator power, the yellow is for solar panel input. The blue Anderson plug on top is for Li battery connection (different colour Anderson plugs are not inter-compatible). Controlled by Victron BMV712 smart meter with shunt. Projecta 25Amp Lithium DC-DC charger with solar input. Connects to a smart charger-compatible Anderson plug in cargo section of the SantaFe. I use it for CB UHF, a Bushman car fridge etc on long tripsWell if I decide this unit doesn't keep doing a fine job I'll work out something else
Thanks, Good idea
I can’t recall where, but someone posted that the stuff on that control panel is not backlit. Has anyone seen any nighttime/dark interior photos?Assuming the console switch segments are actually separate and individually fastened in place, AND, as someone else has already noted, the heated seats are not fitted, then their respective fascia plates are "begging" to be repurposed! Hopefully IA deliver on their promise of open access to wiring diagrams
View attachment 7802902
One of the reviews I saw mentioned it’s lit by ambient light though it didn’t mention the source. (possibly from overhead switch panel)
I haven’t seen any extra display (for example within the knob) so it’s presumably on the main display
Thanks. I must have missed that along the way. The symbols are plenty visible, so again, nothing to fret over.
