The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

What is that drone?

Zimm

Grenadier Owner
Local time
5:18 AM
Joined
Apr 28, 2023
Messages
1,658
Location
Pittsburgh
I saw it mentioned twice in the new jeep thread, and it always perplexes me. At 2000 rpm, on the highway, especially under load the 8th (double overdrive) drones.

Now the motor is an I6, which ought to be smooth, and BMW uses it and the zf8 in everything because a base drivetrain that doesn't get complaints is what you want to move lots of boxes. I don't think this engine or tranny, or combo does the the 4 cylinder drone imitation in anything else. What did Ineos do that elicited this wonderful feature? Is it the exhaust somehow resonating with the drive train? If I keep it from shifting to 8, there's a little bit of something, but whatever is pairing up to create the drone never really comes to full fruition. I feel like going to a shop and asking for the quietest most restrictive exhaust box that will fit to see what happens, because I don't know how they did it.
 
Hello, since my vehicle was delivered in August 2023, I have been experiencing an annoying, low-frequency droning or humming noise. It occurs between 95-120 km/h and has nothing to do with other rattling, droning and whistling noises. I am not aware of any official remedy, neither from Ineos itself nor from a service partner. From my experience as a master mechanic with many years of experience with four-wheel drive vehicles, I suspect the cause to be in the drivetrain, more precisely in an imbalance of the cardan shafts. During test drives with the cardan shaft removed, the noises were reduced, but never disappeared completely (it's hard to drive without a shaft :-)). I suspect that both shafts have an imbalance. But it could also be due to the tensioning! Removing the front cardan shaft had a stronger effect. I wonder if the (too) strong bending angle of the front shaft might have something to do with it? As already described, there is little interest on the part of Ineos customer service in investigating the matter, giving a technically correct answer or similar. Has anyone had their shafts re-balanced? Or has anyone had one or both shafts replaced? (at best with success?)
 
Back
Top Bottom